Le 13/12/2013 11:37, Marcus Schäfer a écrit : > Hi Guillaume, > > I bought a Rasppery-Pi(B) board to finally be able to test something
Good news! :) > I have the same trouble. So far the board does not boot. my current > disk layout looks like this for the test image: > > parted /tmp/LimeJeOS-13.1.armv6l-1.13.1.raw print > Model: (file) > Disk /tmp/LimeJeOS-13.1.armv6l-1.13.1.raw: 774MB > Sector size (logical/physical): 512B/512B > Partition Table: msdos > > Number Start End Size Type File system Flags > 1 1049kB 211MB 210MB primary fat32 boot, lba, type=0c > 2 212MB 774MB 562MB primary lvm, type=8e > > >> If I resize FAT partition with YaST partitionner from 200 MB to 196 MB >> or less, it does boot. > Now that you remind me on this I remember you wrote me a mail > I'm sorry I totally have missed that. So you are saying if I set > > <type ... bootpartsize="100M"/> > > it should work ? That sounds strange but I will build a new image > with that size and see No, what I mean is if I resize manually the FAT partition with YaST partitionner, then it does boot. So the partition table may be wrong or there might be some overlap or something. > >> Moreover, raspberrypi-firmware package has bootinclude flag set >> to true but files ending with *.dat are missing from BOOT partition. >> Is there any filter for such a file? > yes I fixed some bugs in that area. I also added support for > the bootloader="berryboot" so that we don't have to do this nasty > things with config.txt and cmdline.txt in our handmade scripts Ok. > > As soon as I get my image to fly I will update the kiwi in 13.1:Ports Ok, thanks. One last thing. Now, DTB files should be located in /boot/dtb/ folder whereas, previously, we used /boot/. So we should update kiwi accordingly, otherwise DTB files are not in BOOT partition. Do you want I send you a patch for that one or could you do it? Guillaume > > Regards, > Marcus -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
