Op donderdag 26 februari 2015 10:44:17 schreef Andreas Färber:
> Am 26.02.2015 um 10:12 schrieb Freek de Kruijf:
> > Op woensdag 25 februari 2015 23:33:31 schreef Andreas Färber:
> >> Am 25.02.2015 um 22:11 schrieb Freek de Kruijf:
> >>> I have a strange problem with Wi-Fi connections to two somewhat
> >>> different
> >>> Access Points.
> >>> Both use the same configuration in "YaST network", apart from SSID and
> >>> IP
> >>> address. Still the connection does succeed with one AP, but to the other
> >>> AP it always fails.
> >> 
> >> In my experience the most frequent cause of inexplicable AP connection
> >> problems is a misconfigured RTC. If you're using Ethernet too, make sure
> >> NTP is configured.
> > 
> > What do you mean by RTC?
> 
> Real time clock, i.e. `date`.
> 
> > And NTP means Network Tine Protocol?
> 
> Yes. Can be configured through the yast time(zone) settings.
> 
> Andreas

I have a test set up with the RPi connected via the UTP port and two different 
Wi-Fi USB dongles in the two USB ports of the RPi. The clock is synchronized 
using NTP via the wired connection. So there is nothing wrong with the RTC and 
NTP. The two Wi-Fi interfaces are configured the same way apart from the SSID 
and IP address. I exchanged the SSIDs of these interfaces and both connect to 
one AP and not to the other AP.

-- 
fr.gr.

Freek de Kruijf

--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]

Reply via email to