On 2/12/20 8:59 AM, ITwrx wrote: > On 2/12/20 1:49 AM, Matwey V. Kornilov wrote: >> Hi, >> >> It is very strange to hear that. I deployed this image to couple of >> Rock64-s week ago. >> So, could you please be more specific? What are you trying to do exactly? >> >> You are supposed to download >> openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30-Build5.29.raw.xz >> uncompress it with `xz -d >> openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30-Build5.29.raw.xz` >> and write .raw file to microsd card as the following `dd_rescue >> openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30-Build5.29.raw >> /dev/your_sd_card_here`. > That's what i did, but i'll try it again. I didn't get any errors when > writing the image. This time, i'll wipe the sd card and create one fat > partition, just to be on the safe side. >> Do you have usb rs232 ttl converter to attach the Rock64 console? What >> does it say? > i did, but i don't remember. It didn't get very far. If it fails this > time, i'll copy and paste the output. > > Thanks > >> ср, 12 февр. 2020 г. в 10:17, Guillaume Gardet <guillaume.gar...@arm.com>: >>> Hi, >>> >>>> -----Original Message----- >>>> From: ITwrx <i...@itwrx.org> >>>> Sent: 12 February 2020 03:49 >>>> To: opensuse-arm@opensuse.org >>>> Subject: [opensuse-arm] Rock64 >>>> >>>> Thorston/All, >>>> >>>> i just wanted to report that there are not Rock64 microOS images, only >>>> images for >>>> the older pine64. >>>> >>>> Also, the instructions on the Rock64 openSUSE wiki don't work (exactly as >>>> they >>>> are), using the below linked image file. I don't know what the >>>> corresponding >>>> "packages" file is for or how to use it, so it was not used in any way. >>>> The Rock64 >>> The "packages" file is just the list of installed packages in this *.raw.xz >>> image. >>> >>>> openSUSE wiki page didn't mention anything about it. Probably why the board >>>> won't boot... :) >>>> >>>> http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Roc >>>> kchip/images/openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30- >>>> Build5.29.raw.xz >>>> >>>> Any tips appreciated. >>> Added Matwey in Cc who may help. >>> >>> Cheers, >>> Guillaume >>> >>>> Thanks, >>>> >>>> ITwrx >>>> >>>> >>>> -- >>>> To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org >>>> To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Ok, i misspoke earlier. The first time i didn't extract, then run dd_rescue per your instructions. i ran "xzcat [image].raw.xz | dd bs=4M of=/dev/sdX iflag=fullblock oflag=direct; sync" (substituting relevant info) per the wiki. This time i did use your commands. I got the same result and output in the serial console as before. > U-Boot TPL 2020.01 (Jan 30 2020 - 10:43:44) > data training error > col error > data training error > LPDDR3, 800MHz > BW=16 Col=12 Bk=8 CS0 Row=16 CS=1 Die BW=8 Size=4096MB I don't know much about Arm, so i don't know what that output means. :) Thanks -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
