HI
Here is the menu.lst and fdisk -all:
cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Thu Nov 1 21:55:54 EDT 2007
default 2
timeout 8
##YaST - generic_mbr
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.2
kernel (hd0,3)/boot/vmlinuz root=/dev/disk/by-label//1
resume=/dev/hda3 splash=silent showopts
initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.2
kernel (hd0,3)/boot/vmlinuz root=/dev/disk/by-label//1 showopts
ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default
title openSUSE 10.2 - 2.6.18.8-0.5
kernel (hd0,3)/boot/vmlinuz-2.6.18.8-0.5-default
root=/dev/disk/by-label//1 resume=/dev/hda3 splash=silent showopts
initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default
title Failsafe -- openSUSE 10.2 - 2.6.18.8-0.5
kernel (hd0,3)/boot/vmlinuz-2.6.18.8-0.5-default
root=/dev/disk/by-label//1 showopts ide=nodma apm=off acpi=off noresume
nosmp noapic maxcpus=0 edd=off
initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default
title suse 10.2 64
rootnoverify (hd0,0)
chainloader (hd1,1)+1
title Centos 4
rootnoverify (hd0,0)
chainloader (hd0,1)+1
title Fedora 7
rootnoverify (hd0,0)
chainloader (hd1,2)+1
title XEN -- openSUSE 10.2 - 2.6.18.8-0.5
kernel (hd0,3)/boot/xen.gz
module (hd0,3)/boot/vmlinuz-2.6.18.8-0.5-xen
root=/dev/disk/by-label//1 resume=/dev/hda3 splash=silent showopts
module (hd0,3)/boot/initrd-2.6.18.8-0.5-xen
title 10.3
rootnoverify (hd0,0)
chainloader (hd1,4)+1
Suse102:/boot/grub #
Disk /dev/hda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 5951 17000 88759125 c W95 FAT32 (LBA)
/dev/hda2 1 1275 10241406 83 Linux
/dev/hda3 1276 1466 1534207+ 82 Linux swap / Solaris
/dev/hda4 * 1467 5950 36017730 83 Linux
Partition table entries are not in disk order
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 15701 126118251 83 Linux
/dev/sda2 * 15702 16485 6297480 83 Linux
/dev/sda3 16486 17601 8964270 83 Linux
/dev/sda4 17602 38913 171188640 f W95 Ext'd (LBA)
/dev/sda5 17602 18717 8964238+ 83 Linux
Disk /dev/hde: 40.0 GB, 40027029504 bytes
255 heads, 63 sectors/track, 4866 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hde1 * 1 4865 39078081 7 HPFS/NTFS
Suse102:~ #
Gabriel . wrote:
2007/11/2, Jose <[EMAIL PROTECTED]>:
Hi Everybody,
I have this suse 10.2 machine as the master distro installed, sitting on
a hda partition, along with a couple of more distros on the same drive,
I have another sdb drive (SATA) with a few more partitions, I have
chainloaded from the 10.2 booter a couple of distros, one of them fedora
and the other 10.3, Fedora would boot up if selected, but 10.3 will not,
both have rootnoverify as an option, and I have both installed with
their own grub booting from within their own root partition, so I am not
sure why 10.3 is not working, if I put the DVD and select to boot the
10.3 install it works.
Any ideas, I have seen lots of issues with SATA, but nothing as the way
I am doing it
Thanks in advance for your help
Jose
Could you please put menu.lst the device.map.
Also, please put the detail of your disks/partitions
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
