On Tuesday 04 December 2007 12:48:46 Jim Flanagan wrote: > Hi, > > On my new 10.3 install I set up 2 drives in raid1 mirror, using software > raid in yast. All seems to be working fine except in Kinfocenter>memory > swap is shown as not available. Yast shows swap with an "*" beside it. > My partitions are set up as follows: > primary > /dev/md0 /boot > extended > /dev/md1 /swap > /dev/md2 / > /dev/md3 /home > /dev/md4 /share > > I'm not that familiar with tweaking swap and have only set it up in > yast>partitioner before with no previous problems. This is my first raid > setup so there may be an issue with that, but again, all others > partitions are working fine. I tried editing swap in yast to format it > again as /swap but it failed with an error code -3004. > > Anyone know what this problem may be? > > Many thanks, > > JIm F
I don't normally SoftRAID the swap partitions as it would be faster just to have multiple ones instead (you're not limited to one). Have you tried tryping swapon /dev/md1 to see if it starts working? Matthew -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]