Signed-off-by: Alon Bar-Lev <alon.bar...@gmail.com> --- install-win32/sample.ovpn | 103 -------------------------------------------- sample-windows/sample.ovpn | 103 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 103 insertions(+), 103 deletions(-) delete mode 100755 install-win32/sample.ovpn create mode 100755 sample-windows/sample.ovpn
diff --git a/install-win32/sample.ovpn b/install-win32/sample.ovpn deleted file mode 100755 index 5accd57..0000000 --- a/install-win32/sample.ovpn +++ /dev/null @@ -1,103 +0,0 @@ -# Edit this file, and save to a .ovpn extension -# so that OpenVPN will activate it when run -# as a service. - -# Change 'myremote' to be your remote host, -# or comment out to enter a listening -# server mode. -remote myremote - -# Uncomment this line to use a different -# port number than the default of 1194. -; port 1194 - -# Choose one of three protocols supported by -# OpenVPN. If left commented out, defaults -# to udp. -; proto [tcp-server | tcp-client | udp] - -# You must specify one of two possible network -# protocols, 'dev tap' or 'dev tun' to be used -# on both sides of the connection. 'tap' creates -# a VPN using the ethernet protocol while 'tun' -# uses the IP protocol. You must use 'tap' -# if you are ethernet bridging or want to route -# broadcasts. 'tun' is somewhat more efficient -# but requires configuration of client software -# to not depend on broadcasts. Some platforms -# such as Solaris, OpenBSD, and Mac OS X only -# support 'tun' interfaces, so if you are -# connecting to such a platform, you must also -# use a 'tun' interface on the Windows side. - -# Enable 'dev tap' or 'dev tun' but not both! -dev tap - -# This is a 'dev tap' ifconfig that creates -# a virtual ethernet subnet. -# 10.3.0.1 is the local VPN IP address -# and 255.255.255.0 is the VPN subnet. -# Only define this option for 'dev tap'. -ifconfig 10.3.0.1 255.255.255.0 - -# This is a 'dev tun' ifconfig that creates -# a point-to-point IP link. -# 10.3.0.1 is the local VPN IP address and -# 10.3.0.2 is the remote VPN IP address. -# Only define this option for 'dev tun'. -# Make sure to include the "tun-mtu" option -# on the remote machine, but swap the order -# of the ifconfig addresses. -;tun-mtu 1500 -;ifconfig 10.3.0.1 10.3.0.2 - -# If you have fragmentation issues or misconfigured -# routers in the path which block Path MTU discovery, -# lower the TCP MSS and internally fragment non-TCP -# protocols. -;fragment 1300 -;mssfix - -# If you have set up more than one TAP-Win32 adapter -# on your system, you must refer to it by name. -;dev-node my-tap - -# You can generate a static OpenVPN key -# by selecting the Generate Key option -# in the start menu. -# -# You can also generate key.txt manually -# with the following command: -# openvpn --genkey --secret key.txt -# -# key must match on both ends of the connection, -# so you should generate it on one machine and -# copy it to the other over a secure medium. -# Place key.txt in the same directory as this -# config file. -secret key.txt - -# Uncomment this section for a more reliable -# detection when a system loses its connection. -# For example, dial-ups or laptops that travel -# to other locations. -# -# If this section is enabled and "myremote" -# above is a dynamic DNS name (i.e. dyndns.org), -# OpenVPN will dynamically "follow" the IP -# address of "myremote" if it changes. -; ping-restart 60 -; ping-timer-rem -; persist-tun -; persist-key -; resolv-retry 86400 - -# keep-alive ping -ping 10 - -# enable LZO compression -comp-lzo - -# moderate verbosity -verb 4 -mute 10 diff --git a/sample-windows/sample.ovpn b/sample-windows/sample.ovpn new file mode 100755 index 0000000..5accd57 --- /dev/null +++ b/sample-windows/sample.ovpn @@ -0,0 +1,103 @@ +# Edit this file, and save to a .ovpn extension +# so that OpenVPN will activate it when run +# as a service. + +# Change 'myremote' to be your remote host, +# or comment out to enter a listening +# server mode. +remote myremote + +# Uncomment this line to use a different +# port number than the default of 1194. +; port 1194 + +# Choose one of three protocols supported by +# OpenVPN. If left commented out, defaults +# to udp. +; proto [tcp-server | tcp-client | udp] + +# You must specify one of two possible network +# protocols, 'dev tap' or 'dev tun' to be used +# on both sides of the connection. 'tap' creates +# a VPN using the ethernet protocol while 'tun' +# uses the IP protocol. You must use 'tap' +# if you are ethernet bridging or want to route +# broadcasts. 'tun' is somewhat more efficient +# but requires configuration of client software +# to not depend on broadcasts. Some platforms +# such as Solaris, OpenBSD, and Mac OS X only +# support 'tun' interfaces, so if you are +# connecting to such a platform, you must also +# use a 'tun' interface on the Windows side. + +# Enable 'dev tap' or 'dev tun' but not both! +dev tap + +# This is a 'dev tap' ifconfig that creates +# a virtual ethernet subnet. +# 10.3.0.1 is the local VPN IP address +# and 255.255.255.0 is the VPN subnet. +# Only define this option for 'dev tap'. +ifconfig 10.3.0.1 255.255.255.0 + +# This is a 'dev tun' ifconfig that creates +# a point-to-point IP link. +# 10.3.0.1 is the local VPN IP address and +# 10.3.0.2 is the remote VPN IP address. +# Only define this option for 'dev tun'. +# Make sure to include the "tun-mtu" option +# on the remote machine, but swap the order +# of the ifconfig addresses. +;tun-mtu 1500 +;ifconfig 10.3.0.1 10.3.0.2 + +# If you have fragmentation issues or misconfigured +# routers in the path which block Path MTU discovery, +# lower the TCP MSS and internally fragment non-TCP +# protocols. +;fragment 1300 +;mssfix + +# If you have set up more than one TAP-Win32 adapter +# on your system, you must refer to it by name. +;dev-node my-tap + +# You can generate a static OpenVPN key +# by selecting the Generate Key option +# in the start menu. +# +# You can also generate key.txt manually +# with the following command: +# openvpn --genkey --secret key.txt +# +# key must match on both ends of the connection, +# so you should generate it on one machine and +# copy it to the other over a secure medium. +# Place key.txt in the same directory as this +# config file. +secret key.txt + +# Uncomment this section for a more reliable +# detection when a system loses its connection. +# For example, dial-ups or laptops that travel +# to other locations. +# +# If this section is enabled and "myremote" +# above is a dynamic DNS name (i.e. dyndns.org), +# OpenVPN will dynamically "follow" the IP +# address of "myremote" if it changes. +; ping-restart 60 +; ping-timer-rem +; persist-tun +; persist-key +; resolv-retry 86400 + +# keep-alive ping +ping 10 + +# enable LZO compression +comp-lzo + +# moderate verbosity +verb 4 +mute 10 -- 1.7.3.4
