Il 29.02.2012 22:11, Alon Bar-Lev ha scritto: > Signed-off-by: Alon Bar-Lev <alon.bar...@gmail.com> > --- > install-win32/sample.ovpn | 103 > -------------------------------------------- > sample-windows/sample.ovpn | 103 > ++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 103 insertions(+), 103 deletions(-) > delete mode 100755 install-win32/sample.ovpn > create mode 100755 sample-windows/sample.ovpn > > diff --git a/install-win32/sample.ovpn b/install-win32/sample.ovpn > deleted file mode 100755 > index 5accd57..0000000 > --- a/install-win32/sample.ovpn > +++ /dev/null > @@ -1,103 +0,0 @@ > -# Edit this file, and save to a .ovpn extension > -# so that OpenVPN will activate it when run > -# as a service. > - > -# Change 'myremote' to be your remote host, > -# or comment out to enter a listening > -# server mode. > -remote myremote > - > -# Uncomment this line to use a different > -# port number than the default of 1194. > -; port 1194 > - > -# Choose one of three protocols supported by > -# OpenVPN. If left commented out, defaults > -# to udp. > -; proto [tcp-server | tcp-client | udp] > - > -# You must specify one of two possible network > -# protocols, 'dev tap' or 'dev tun' to be used > -# on both sides of the connection. 'tap' creates > -# a VPN using the ethernet protocol while 'tun' > -# uses the IP protocol. You must use 'tap' > -# if you are ethernet bridging or want to route > -# broadcasts. 'tun' is somewhat more efficient > -# but requires configuration of client software > -# to not depend on broadcasts. Some platforms > -# such as Solaris, OpenBSD, and Mac OS X only > -# support 'tun' interfaces, so if you are > -# connecting to such a platform, you must also > -# use a 'tun' interface on the Windows side. > - > -# Enable 'dev tap' or 'dev tun' but not both! > -dev tap > - > -# This is a 'dev tap' ifconfig that creates > -# a virtual ethernet subnet. > -# 10.3.0.1 is the local VPN IP address > -# and 255.255.255.0 is the VPN subnet. > -# Only define this option for 'dev tap'. > -ifconfig 10.3.0.1 255.255.255.0 > - > -# This is a 'dev tun' ifconfig that creates > -# a point-to-point IP link. > -# 10.3.0.1 is the local VPN IP address and > -# 10.3.0.2 is the remote VPN IP address. > -# Only define this option for 'dev tun'. > -# Make sure to include the "tun-mtu" option > -# on the remote machine, but swap the order > -# of the ifconfig addresses. > -;tun-mtu 1500 > -;ifconfig 10.3.0.1 10.3.0.2 > - > -# If you have fragmentation issues or misconfigured > -# routers in the path which block Path MTU discovery, > -# lower the TCP MSS and internally fragment non-TCP > -# protocols. > -;fragment 1300 > -;mssfix > - > -# If you have set up more than one TAP-Win32 adapter > -# on your system, you must refer to it by name. > -;dev-node my-tap > - > -# You can generate a static OpenVPN key > -# by selecting the Generate Key option > -# in the start menu. > -# > -# You can also generate key.txt manually > -# with the following command: > -# openvpn --genkey --secret key.txt > -# > -# key must match on both ends of the connection, > -# so you should generate it on one machine and > -# copy it to the other over a secure medium. > -# Place key.txt in the same directory as this > -# config file. > -secret key.txt > - > -# Uncomment this section for a more reliable > -# detection when a system loses its connection. > -# For example, dial-ups or laptops that travel > -# to other locations. > -# > -# If this section is enabled and "myremote" > -# above is a dynamic DNS name (i.e. dyndns.org), > -# OpenVPN will dynamically "follow" the IP > -# address of "myremote" if it changes. > -; ping-restart 60 > -; ping-timer-rem > -; persist-tun > -; persist-key > -; resolv-retry 86400 > - > -# keep-alive ping > -ping 10 > - > -# enable LZO compression > -comp-lzo > - > -# moderate verbosity > -verb 4 > -mute 10 > diff --git a/sample-windows/sample.ovpn b/sample-windows/sample.ovpn > new file mode 100755 > index 0000000..5accd57 > --- /dev/null > +++ b/sample-windows/sample.ovpn > @@ -0,0 +1,103 @@ > +# Edit this file, and save to a .ovpn extension > +# so that OpenVPN will activate it when run > +# as a service. > + > +# Change 'myremote' to be your remote host, > +# or comment out to enter a listening > +# server mode. > +remote myremote > + > +# Uncomment this line to use a different > +# port number than the default of 1194. > +; port 1194 > + > +# Choose one of three protocols supported by > +# OpenVPN. If left commented out, defaults > +# to udp. > +; proto [tcp-server | tcp-client | udp] > + > +# You must specify one of two possible network > +# protocols, 'dev tap' or 'dev tun' to be used > +# on both sides of the connection. 'tap' creates > +# a VPN using the ethernet protocol while 'tun' > +# uses the IP protocol. You must use 'tap' > +# if you are ethernet bridging or want to route > +# broadcasts. 'tun' is somewhat more efficient > +# but requires configuration of client software > +# to not depend on broadcasts. Some platforms > +# such as Solaris, OpenBSD, and Mac OS X only > +# support 'tun' interfaces, so if you are > +# connecting to such a platform, you must also > +# use a 'tun' interface on the Windows side. > + > +# Enable 'dev tap' or 'dev tun' but not both! > +dev tap > + > +# This is a 'dev tap' ifconfig that creates > +# a virtual ethernet subnet. > +# 10.3.0.1 is the local VPN IP address > +# and 255.255.255.0 is the VPN subnet. > +# Only define this option for 'dev tap'. > +ifconfig 10.3.0.1 255.255.255.0 > + > +# This is a 'dev tun' ifconfig that creates > +# a point-to-point IP link. > +# 10.3.0.1 is the local VPN IP address and > +# 10.3.0.2 is the remote VPN IP address. > +# Only define this option for 'dev tun'. > +# Make sure to include the "tun-mtu" option > +# on the remote machine, but swap the order > +# of the ifconfig addresses. > +;tun-mtu 1500 > +;ifconfig 10.3.0.1 10.3.0.2 > + > +# If you have fragmentation issues or misconfigured > +# routers in the path which block Path MTU discovery, > +# lower the TCP MSS and internally fragment non-TCP > +# protocols. > +;fragment 1300 > +;mssfix > + > +# If you have set up more than one TAP-Win32 adapter > +# on your system, you must refer to it by name. > +;dev-node my-tap > + > +# You can generate a static OpenVPN key > +# by selecting the Generate Key option > +# in the start menu. > +# > +# You can also generate key.txt manually > +# with the following command: > +# openvpn --genkey --secret key.txt > +# > +# key must match on both ends of the connection, > +# so you should generate it on one machine and > +# copy it to the other over a secure medium. > +# Place key.txt in the same directory as this > +# config file. > +secret key.txt > + > +# Uncomment this section for a more reliable > +# detection when a system loses its connection. > +# For example, dial-ups or laptops that travel > +# to other locations. > +# > +# If this section is enabled and "myremote" > +# above is a dynamic DNS name (i.e. dyndns.org), > +# OpenVPN will dynamically "follow" the IP > +# address of "myremote" if it changes. > +; ping-restart 60 > +; ping-timer-rem > +; persist-tun > +; persist-key > +; resolv-retry 86400 > + > +# keep-alive ping > +ping 10 > + > +# enable LZO compression > +comp-lzo > + > +# moderate verbosity > +verb 4 > +mute 10 > -- > 1.7.3.4 > > Just wondering... why not move sample.ovpn to "sample-config-files" directory?
-- Samuli Seppänen Community Manager OpenVPN Technologies, Inc irc freenode net: mattock