Hi All, I rebased the patch on the last tr...@17618 the external-toolchain patch in the main line.
best regards, luigi On Thu, Sep 10, 2009 at 12:56 AM, Luigi Mantellini <luigi.mantellini...@gmail.com> wrote: > Thanks :D > > On Thu, Sep 10, 2009 at 12:17 AM, Nico<n...@openwrt.org> wrote: >> Hi Luigi, >> >> There were no particular reasons preventing external toolchain support >> from hitting trunk apart from a constant lack of time on my side... >> >> I'll try my best to have it commited by the end of the week. >> >> Thanks for your help and support ! >> >> Regards, >> -- >> Nico >> >> >> Luigi 'Comio' Mantellini wrote: >>> Hi List, >>> Hi Nico, >>> >>> find the attached my contribute. >>> Starting from nico's patch I build this patchset that adds the ability to >>> use >>> use an external toolchain (rebased on r17459). >>> >>> I compiled a simple ppc440 target with and without the external toolchain >>> usage and it seems to work fine. As external toolchain I used the >>> CodeSourcery >>> G++lite 4.3-50 for Power EABI >>> (http://www.codesourcery.com/sgpp/lite/power/portal/release603). >>> >>> Find also the config.external and config.normal configs to look my board >>> setup. >>> >>> My wish is to see this patch in the main-line as soon possible because is >>> very >>> important for my job. >>> >>> Any feedback is welcome. >>> >>> best regards, >>> >>> luigi >>> >>> >>> >>> Il domenica 6 settembre 2009 20:26:46 Luigi Mantellini ha scritto: >>> >>>> Hi List, >>>> >>>> as in the past I will ask again opinions regarding the optional >>>> support for external cross-toolchain. >>>> >>>> Reading the dev.openwrt.org I see: >>>> >>>> "OpenWrt is currently being used in industrial control systems, small >>>> robots, sensor networks, home control solutions, VoIP systems, both >>>> wired and wireless networks and a whole lot more." >>>> >>>> I'm working on network devices and usually I receive from my vendors >>>> the BSP and toolchain that is considered "official" and "safe" for the >>>> BSP. My suppliers usually don't accent to support BSP (and anwser to >>>> my questions) if I don't use the provided toolchain. >>>> >>>> From these considerations, My opinion is that external target-specific >>>> toolchian should be supported by OpenWRT avoiding to compile everytime >>>> the toolchain. >>>> >>>> In past Nico sent a set of patch for support this feature but I think >>>> that are not included yet in the mainline. >>>> >>>> Nico, can you provide me your last patches? and explain if them will >>>> be included or not? >>>> >>>> thanks in advance and best regards, >>>> >>>> luigi >>>> >>>> >>> >>> >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> > > > > -- > Luigi 'Comio' Mantellini > R&D - Software > Industrie Dial Face S.p.A. > Via Canzo, 4 > 20068 Peschiera Borromeo (MI), Italy > > Tel.: +39 02 5167 2813 > Fax: +39 02 5167 2459 > web: www.idf-hit.com > mail: luigi.mantell...@idf-hit.com > -- Luigi 'Comio' Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 web: www.idf-hit.com mail: luigi.mantell...@idf-hit.com
0001-toolchain-Add-external-toolchain-support.patch
Description: Binary data
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel