When you have an old working trunk version you can try to narrow down the changeset that broke trunk. Check out revisions, compile, flash and test. Efficient is trying the circa middle between known broken and known working revision. When broken then raise known broken revision. When it's working lower known working revision. Try the middle again. You could of course check the changelog in trac to see if there where changes to critical components for your problem.
.. good luck ede On 26.02.2010 21:42, Xavier Martinez wrote: > eth1 is not working anymore in current trunk (r19860). It seems to work > in previous versions (19694), at least pings are answered and ssh > connection is possible. > > On the other hand, when running olsrd under r19694, packets from other > hosts in the network are not received by this interface. I verified that > packets are sent using tcpdump and reproduced the bug using different > hosts, running ubuntu 9.10, openwrt 8.09.2, etc... I tried several olsrd > versions 0.5.8-r8, 0.5.8-r7, etc.. with the same results. However, ssh > connections work fine and pings are answered in all cases. When > connecting neighbour host to eth0, everything works perfect... Strange > behaviour isn't it? I would appreciate any help 'cause if we get this > second ethernet port working, we would save a lot of cable... > > Thanks! > > Xavier > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
