2013-12-12 16:19 időpontban Saverio Proto ezt írta:
Hello,
today I tried to boot the latest trunk with my CubieboardA10, but I
cannot boot at all.
I followed this guide:
http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi
the most important stuff is:
dd if=openwrt-sunxi-Cubieboard-sunxi-with-spl.bin of=/dev/sdb bs=1024
seek=8
then I formatted vfat the first partition and I copied the kernel file:
cp openwrt-sunxi-uImage-initramfs /mountpoint/uImage
Here is the boot log from serial console:
http://pastebin.com/CLAcNL91
it looks to me like the uboot configuration is messed up.
Zoltan any hint how to successfully boot ?
Hi Saverio,
You can try what's in http://wiki.openwrt.org/toh/olimex/a20-olinuxino
or the A13 page as a starter (linked at the top of the
soc.allwinner.sunxi page), as the uboot configs for the given boards are
not updated yet. Also, as for myself I don't have neither of the CBs,
when you get to it can you please document it.
Regards,
-w-
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
