On 24/06/2014 19:05, Paul Blazejowski wrote: > John, > > Yes i use the reset with pin and from there i tftp the original > firmware from netgear after that i go to the gui and upload the > open-wrt image because the router will not accept the wndr3700v4 > image (there's a cosmetic fix for that, i created a patch that > someone from the forums has sent months ago to this list but it was > never accepted...) https://dev.openwrt.org/ticket/16840 > > With that patch tftp'ing the > openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works without need > to flash the original firmware. > > If there's another method that can be used to flash the image(s) > please let me know i would want to try any alternative ways of > flashing and could learn a thing or two in the process as well ;-) > > Thank you, -paul
Hi, i just pushed the V vs v fix and another fix that removes the jffs2 magic. i think this might have been the cause of the problems. please retry with current trunk and let me know if the problem is gone or still there John _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel