Geez, it must be true that you should only sleep when you're dead...damn Aussie time zones...
I'll test with latest trunk as well & will confirm. But looks promising! -----Original Message----- From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of Paul Blazejowski Sent: Wednesday, 25 June 2014 6:27 AM To: John Crispin Cc: openwrt-devel@lists.openwrt.org Subject: Re: [OpenWrt-Devel] [BUG] NAND sysupgrade broke ubifs on Netgear WNDR3700v4/4300. sorry i meant https://dev.openwrt.org/ticket/16803 the previous one is closed for good ;-) On Tue, 2014-06-24 at 16:25 -0400, Paul Blazejowski wrote: > Hi again, > > thanks for the tftp fix, flushing just became so much faster and easier. > > Tested trunk r41336 after your jffs2 fix and the image boots fine, > restored my configuration changes, rebooted the router and all changes > are saved now. I will post the working dmesg to the ticket at > https://dev.openwrt.org/ticket/16840 but it is safe to say that you > can close it ;-) now. > > Sysupgrade image(s) for 3700v4 and 4300 do not work now, guess this is > next on the list... > > Thank you, > -paul > > On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote: > > > > On 24/06/2014 19:05, Paul Blazejowski wrote: > > > John, > > > > > > Yes i use the reset with pin and from there i tftp the original > > > firmware from netgear after that i go to the gui and upload the > > > open-wrt image because the router will not accept the wndr3700v4 > > > image (there's a cosmetic fix for that, i created a patch that > > > someone from the forums has sent months ago to this list but it > > > was never accepted...) https://dev.openwrt.org/ticket/16840 > > > > > > With that patch tftp'ing the > > > openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works without need > > > to flash the original firmware. > > > > > > If there's another method that can be used to flash the image(s) > > > please let me know i would want to try any alternative ways of > > > flashing and could learn a thing or two in the process as well ;-) > > > > > > Thank you, -paul > > > > > > Hi, > > > > i just pushed the V vs v fix and another fix that removes the jffs2 > > magic. i think this might have been the cause of the problems. > > please retry with current trunk and let me know if the problem is > > gone or still there > > > > John > > _______________________________________________ > > openwrt-devel mailing list > > openwrt-devel@lists.openwrt.org > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel