to make the config be there after a factory reset, you need to put the changes
into the image that you build.
you already did this for /etc/config/network, do the same thing for
/etc/config/wireless
David Lang
On Sun, 2 Aug 2015, John kerry wrote:
Hi Leiten,
I have one issue, after upgrading this firmware it will load wireless
configuration with this changes, actually it should load when i do factory
reset.
Thanks,
On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9...@gmail.com> wrote:
Hi Leiten,
Thank you so much, Its working :)
On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nicklei...@gmail.com> wrote:
Hi,
Don't answer to my e-mail only, you need to add openwrt-devel maillist to
CC or just answer to CC, in each case I'll receive message but also
everyone could see all discussion.
In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
wrote:
Hi Leiten,
I have added new files under and written below :
vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
Use index in prefix of filename to set order of execution, so it'll be
like '99-wireless'.
#!/bin/sh
#
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
# Copyright (C) 2011 OpenWrt.org
#
[ -e /etc/config/wireless ] && exit 0
Here is the problem. When uci-defaults invoke scripts there's already
preconfiguration done and /etc/config/wireless already exists, so your
script just exit at this point. Remove this line.
touch /etc/config/wireless
uci set wireless.@wifi-device[0].disabled=0;
uci set system.@system[0].hostname=test_ap
uci set wireless.@wifi-iface[0].mode=ap
uci set wireless.@wifi-iface[0].ssid=CD-2.4D
uci set wireless.@wifi-iface[0].encryption=none
uci set wireless.@wifi-iface[0].wds=1
uci set wireless.radio0.disabled=0
uci commit wireless
exit 0
and compile the source code using make V=s but still not changed default
settings.
Please help me to make it works.
Thanks,
On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nicklei...@gmail.com> wrote:
You can also use uci-defaults mechanism for your purpose. Just put
script in base-files/etc/uci-defaults and set your preferrable
parameters with uci and don't forget to 'exit 0' at the end of script,
in elsecase it'll be run every time at boot ruining changes.
2015-07-31 12:08 GMT+03:00 John kerry <kerry9...@gmail.com>:
Hi,
I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is
disabled and SSID is OpenWrt. I need to change the default settings.
Could anyone help me to change the default settings.
Best Regards,
John
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
