thx John! neat.. that should do the trick. finally a small ssl capable wget, jippee! ..ede
On 22.01.2016 22:32, John Clark wrote: > There is a symbolic link: > > lrwxrwxrwx 1 root root 13 Jan 22 20:04 wget -> > uclient-fetch* > > > On 1/22/16 4:29 PM, edgar.sol...@web.de wrote: >> On 22.01.2016 16:20, Felix Fietkau wrote: >>> On 2016-01-22 16:03, edgar.sol...@web.de wrote: >>>> On 22.01.2016 14:32, Weedy wrote: >>>>>> Question: The busybox binary (for me) goes from 366,401 bytes to 300,327 >>>>> with the removal of wget from it. Therefore, the uclient-fetch binary >>>>> swapout causes a 46,379 byte increase in size. I assume the desire to move >>>>> to uclient-fetch from busybox is for the SSL support? If so, it still >>>>> does >>>>> not support SSL without also building ustream-ssl. >>>> yeah. an ssl capable wget (whatever it's called) out of the box would be >>>> greatly appreciated. >>>> >>>> @Felix: is that on the table? >>> It's already done. With uclient-fetch, you can simply install any >>> ustream-ssl variant (along with ca-certificates if you want to have >>> proper validation), and it'll immediately be SSL capable. That was my >>> main motivation behind replacing wget with ustream-ssl. >>> >>> The aforementioned size increase is probably either a bug or a >>> measurement error (see my other mail regarding that subject). >>> >> nice! is there a possibility to create a wget wrapper? i assume not everyone >> is familiar with uclient-fetch, so at least a stub noting to use >> uclient-fetch might probably help when users are confused that wget isn't >> there. >> >> ..ede >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
