Ping? Any idea for this? Or just a clue so I can fix that? (I don't have much experience with ralink mips stuff) Using a vanilla kernel seems to boot fine BTW..
Thanks, Fred On 01/03/2016 12:19, Frederic Konrad wrote: > Hi everybody, > > I'm a openwrt newbie and I've some issues running OpenWRT on a RT5350 board. > > I tried "openwrt-15.05-ramips-rt305x-vmlinux.bin" which I transformed in > uImage with: > mkimage -A mips -O linux -T kernel -C none -a 0x80000000 -e 0x80000000 \ > -d openwrt-15.05-ramips-rt305x-vmlinux.bin uImage > > But I only get three lines loop when I put that on my target through uboot + > tftp: > > [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 > [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) > [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 > [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) > [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 > [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) > [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 > [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) > [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 > [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) > [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 > [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) > > I've the exact same result when I clone the git and compile the whole thing. > > Did I miss something? > Thanks,Fred > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel