Hi Martin, sorry for the delay, I didn't had time to try this yet. Well, I tested with a custom kernel image before trying openwrt, I don't really want a custom kernel.
The board I have is (approximately) the following: http://www.toplinkst.com/html_products/RT5350-wifi-routerAP-module-48.html Thanks, Fred On 04/03/2016 14:38, Martin Schroeder wrote: > Why are you using a custom kernel when there is proper support for > this board? I'm building full images for it and flashing them either > through sysupgrade or using an spi flash programmer. They all boot > fine for me. > > To properly boot this board you can either use the sysupgrade bin > image or the factory image generated when you pick target for the > "HooToo" box. > > On Fri, Mar 4, 2016 at 10:34 AM, Frédéric Konrad > <konrad.frede...@yahoo.fr> wrote: >> Hi John, >> >> Thanks for your answer! >> >> On 04/03/2016 10:18, John Crispin wrote: >>> On 04/03/2016 10:09, Frédéric Konrad wrote: >>>> Ping? >>>> >>>> Any idea for this? Or just a clue so I can fix that? >>>> (I don't have much experience with ralink mips stuff) >>>> Using a vanilla kernel seems to boot fine BTW.. >>>> >>>> Thanks, >>>> Fred >>>> >>> you are using a kernel that has no dtb. you will need to build a dts >>> file, compile it and patch it into teh kernel. easiest and probably only >>> sane way is to add proper support to openwrt and build a kernel >> That's making sense :), I'll try to append a device tree to the kernel. >> >>> i doubt that vanilla boots properly as vanilla has a rt3050 dts and no 5350. >> Actually it seems that there are not much differences (in terms of cpu) >> between >> rt3050 and rt5350. >> >> So yes it definitely boots but I've no ethernet, usb, gpio drivers which >> is kind of >> useless :). >> >> Thanks, >> Fred >>> John >>> >>> >>>> On 01/03/2016 12:19, Frederic Konrad wrote: >>>>> Hi everybody, >>>>> >>>>> I'm a openwrt newbie and I've some issues running OpenWRT on a RT5350 >>>>> board. >>>>> >>>>> I tried "openwrt-15.05-ramips-rt305x-vmlinux.bin" which I transformed in >>>>> uImage with: >>>>> mkimage -A mips -O linux -T kernel -C none -a 0x80000000 -e 0x80000000 \ >>>>> -d openwrt-15.05-ramips-rt305x-vmlinux.bin uImage >>>>> >>>>> But I only get three lines loop when I put that on my target through >>>>> uboot + tftp: >>>>> >>>>> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version >>>>> 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 >>>>> CEST 2015 >>>>> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >>>>> [ 0.000000] bootconsole [early0] enabled >>>>> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >>>>> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version >>>>> 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 >>>>> CEST 2015 >>>>> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >>>>> [ 0.000000] bootconsole [early0] enabled >>>>> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >>>>> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version >>>>> 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 >>>>> CEST 2015 >>>>> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >>>>> [ 0.000000] bootconsole [early0] enabled >>>>> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >>>>> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version >>>>> 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 >>>>> CEST 2015 >>>>> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >>>>> [ 0.000000] bootconsole [early0] enabled >>>>> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >>>>> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version >>>>> 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 >>>>> CEST 2015 >>>>> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >>>>> [ 0.000000] bootconsole [early0] enabled >>>>> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >>>>> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version >>>>> 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 >>>>> CEST 2015 >>>>> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >>>>> [ 0.000000] bootconsole [early0] enabled >>>>> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >>>>> >>>>> I've the exact same result when I clone the git and compile the whole >>>>> thing. >>>>> >>>>> Did I miss something? >>>>> Thanks,Fred >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> openwrt-devel mailing list >>>>> openwrt-devel@lists.openwrt.org >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel