On 04/03/2016 10:09, Frédéric Konrad wrote: > Ping? > > Any idea for this? Or just a clue so I can fix that? > (I don't have much experience with ralink mips stuff) > Using a vanilla kernel seems to boot fine BTW.. > > Thanks, > Fred >
you are using a kernel that has no dtb. you will need to build a dts file, compile it and patch it into teh kernel. easiest and probably only sane way is to add proper support to openwrt and build a kernel i doubt that vanilla boots properly as vanilla has a rt3050 dts and no 5350. John > On 01/03/2016 12:19, Frederic Konrad wrote: >> Hi everybody, >> >> I'm a openwrt newbie and I've some issues running OpenWRT on a RT5350 board. >> >> I tried "openwrt-15.05-ramips-rt305x-vmlinux.bin" which I transformed in >> uImage with: >> mkimage -A mips -O linux -T kernel -C none -a 0x80000000 -e 0x80000000 \ >> -d openwrt-15.05-ramips-rt305x-vmlinux.bin uImage >> >> But I only get three lines loop when I put that on my target through uboot >> + tftp: >> >> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 >> (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 >> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 >> (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 >> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 >> (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 >> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 >> (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 >> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 >> (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 >> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >> [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 >> (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015 >> [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) >> >> I've the exact same result when I clone the git and compile the whole thing. >> >> Did I miss something? >> Thanks,Fred >> >> >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel