Am Samstag, 19. Juni 2021, 20:36:10 CEST schrieb Hauke Mehrtens: > On a DSA switch the ports have an upper device, the CPU device, e.g. > eth0. This device has to be in up state to bring up the lower devices > like lan1. > > Parse the link device from "ip link show" and bring it into up stated > before bringing up the actual interface. > > This is needed to make network in failsafe on systems with DSA work. >
Hauke, I tested you patches on the Mikrotik RB750Gr3 and WDR3600 (as I did in FS#3866), this time with customized IP-adresses and patches applied to OpenWrt-21.02. For the WDR3600 the issue was fixed, but for the RB750 there is no network. I was not able to usr IPv6 link-local, OpenWrt default 192.168.1.1 or my custom IP-Address. The Rb750 is DSA, so it seems there is still something wrong. I'll retest with current master soon, to rule out issues based on 21.02-rc3. Sven _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel