Hello John,
Thank you for the rather useful tool. One comment below.
On Tue, May 11, 2021 at 05:22:43PM +0200, John Crispin wrote:
> +/* 0x17 - Set power management mode
> + * 0: None (No Power Management mode) (Default in Semi-Auto mode)
> + * 1: Static Power Management with Port Priority(Default in Automode)
> + * 2: Dynamic Power Management with Port Priority
> + * 3: Static Power Management without Port Priority
> + * 4: Dynamic Power Management without Port Priority
> + */
> +static int
> +poe_cmd_power_mgmt_mode(unsigned char mode)
> +{
> + unsigned char cmd[] = { 0x18, 0x00, mode };
Typo in command number here.
Because of it on D-Link DGS-1210-10P R1 with
"firmware": "v24.33",
"mcu": "Nuvoton M05xx LAN Microcontroller",
the power is never provided, the port status changes between "unknown"
(6):
RX -> 0x2a 0x63 0x00 0x11 0xb6 0x11 0x11 0x11 0x11 0x11 0x11 0xba
and "Searching" (1) when I plug and unplug the cable.
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercer...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
