Hi all, Here is my second attempt for initial FritzBox x490 support. 22.03 now has all the necessary prerequisites, so support can be added according to the rules.
The original code snippets were submitted by John Crispin (IIRC), Andreas Böhler and Daniel Kestrel. I carved out the changes I considered necessary, integrated and tested them and cleaned them up (hopefully ;) These are the minimal changes required to run the FB {3,7}490 as DSL router (tested!). The 5490 is reported to be similar, so I included it, but could not test it due to lack of hardware. The wireless on these boxes is offloaded to a secondary SoC which needs to be provided its own OS. This feature is explicitly left out here in order to go step by step. I kept some loose ends where they don't hurt, for future reference. Changes from v1: ---------------- * return to squashfs for the rootfs; ubifs causes too much complexity esp. for updates, when even the same model can be equipped with varying flash chip geometries. UBI partitioning and volumes are kept though. Torsten Duwe (7): lantiq: fix endianess for PCIe slave XBAR lantiq: add common device tree template for x490 Fritzboxes lantiq: add DTS for Fritzbox 3490 lantiq: add DTS for Fritzbox 5490 lantiq: add DTS for Fritzbox 7490 lantiq: add image handling for x490 Fritzboxes lantiq: add renesas USB3 support package/kernel/linux/modules/usb.mk | 1 + target/linux/lantiq/config-5.10 | 2 + .../boot/dts/lantiq/vr9_avm_fritz3490.dts | 58 +++++ .../boot/dts/lantiq/vr9_avm_fritz5490.dts | 98 +++++++ .../boot/dts/lantiq/vr9_avm_fritz7490.dts | 61 +++++ .../boot/dts/lantiq/vr9_avm_fritzx490.dtsi | 240 ++++++++++++++++++ target/linux/lantiq/image/vr9.mk | 30 +++ ...q-ifxmips_pcie-fix-slave-XBAR-endian.patch | 45 ++++ .../xrx200/base-files/etc/board.d/01_leds | 3 +- .../xrx200/base-files/etc/board.d/02_network | 10 +- .../xrx200/base-files/lib/upgrade/platform.sh | 3 + 11 files changed, 549 insertions(+), 2 deletions(-) create mode 100644 target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dts create mode 100644 target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dts create mode 100644 target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7490.dts create mode 100644 target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritzx490.dtsi create mode 100644 target/linux/lantiq/patches-5.10/0156-lantiq-ifxmips_pcie-fix-slave-XBAR-endian.patch -- 2.35.3
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel