Sorry, I was wrong, insert.pl is being invoked every 30 seconds. I enabled command debugging in nagios.conf and see the following in nagios.debug when it runs:
[1274211697.139775] [256.1] [pid=7452] Running command '/usr/local/nagios/bin/insert.pl'... [1274211697.178549] [256.1] [pid=7452] Execution time=0.038 sec, early timeout=0, result=2, output=(null) On command line insert.pl returns nothing. The result in nagiosgraph.log, with logging turned up in nagiosgraph.conf, is many messages like the following: Tue May 18 19:37:16 2010 INSERT info: Input servicedescr:system_freemem Tue May 18 19:37:16 2010 INSERT info: Input output:RAM OK - 24% free (253 MB out of 1036 MB RAM unused) Tue May 18 19:37:16 2010 INSERT warn: perfdata not recognized Tue May 18 19:37:16 2010 INSERT info: RRDs::update /usr/local/nagios/var/rrd/pxy03olvemo/system_freemem/percentfree/value.rrd 1274211428:24 Tue May 18 19:37:16 2010 INSERT info: RRDs::update /usr/local/nagios/var/rrd/pxy03olvemo/system_freemem/totalfree/value.rrd 1274211428:253 Tue May 18 19:37:16 2010 INSERT debug: nagiosgraph exited Dustin E-MAIL CONFIDENTIALITY NOTICE: The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited. _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
