The discrepancy between devices was my fault - I just realized that I had 
uninstall the world altitude correction map but the altitude corrections 
did not revert at that point. Seems a little strange to me, but the higher 
value only reverted after rebooting the device. It now matches the already 
corrected value that is output from the Garmin.

The "Bluetooth GPS" app that I use also allows for geoid correction, so it 
theoretically can be applied as many as three times if that box is checked 
in addition to the osmand and Garmin corrections.

On Sunday, February 18, 2018 at 1:36:12 PM UTC-5, Greg Troxel wrote:
>
>
> Poutnik <[email protected] <javascript:>> writes: 
>
> > For me, it looks like both internal GPS units, in agreement with my 
> > experience, do not provide geoid correction to the amplitude. Therefore 
> > is is about 120' lower than the reference, what is about the correction 
> > value for US region. 
>
> The Android specification is to return ellipsoidal height: 
>
> https://developer.android.com/reference/android/location/Location.html 
>
> and one can get the NMEA also and use either geoid height or GPGGA 
> (orthometric) height: 
>
>
> https://stackoverflow.com/questions/2791927/how-does-getaltitude-of-android-gps-location-works#2797026
>  
>
> https://stackoverflow.com/questions/9361870/android-how-to-get-accurate-altitude
>  
>
> The real question is what's up with the external unit and how that 
> works.  If it's being connected in to replace the internal GPS and 
> accessed via the same interface, it needs to report ellipsoidal height. 
> But the fact that it shows the higher (presumably close to correct for 
> orthometric height) value in satstat on both phones leads me to believe 
> that the android location/altitude (misnamed) interface is being used to 
> get the orthometric height from the bluetooth unit.   That's the big 
> mystery. 
>
> The other mystery is that one of your phones seems to have the elevation 
> correction map in OsmAnd and the other does not. 
>
> Probably OsmAnd should change the symbol to something other than 
> mountain, perhaps "EH", to indicate that it's showing ellipsoidal 
> height, or make it red. 
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Osmand" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to