Claes, Can you post the startup code when you start with "--foreground --error_level=9" and the current version?
For the DS9490R I get: CALL: PARSENAME path=[] CONNECT: Adapter found: 005/005 DEFAULT: Opened USB DS9490 adapter at 005/005. DATA: DS9490_setup_adapter: done (ret=0) DATA: DS9490_overdrive() DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 DATA: BUS_first: No data will be returned DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last path=01 00 00 00 00 00 00 00 DEBUG: Clearing root branch DATA: DS9490_reset DATA: DS9490_reset: ok DATA: DS9490_reset DATA: DS9490_reset: ok DEBUG: DS9490_next_both SN found: 06 8F D6 2D 00 00 00 6F DEBUG: BUS_next return = 0 06 8F D6 2D 00 00 00 6F DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last path=00 00 00 00 00 00 00 00 DATA: DS9490_reset DATA: DS9490_reset: ok DEBUG: DS9490_next_both SN found: 01 86 60 BE 09 00 00 7E DEBUG: BUS_next return = 0 01 86 60 BE 09 00 00 7E CONNECT: Good DS1421 tag found for 005/005 DEFAULT: Set DS9490 005/005 unique id to 01 FFFFFF86 60 FFFFFFBE 09 00 00 7E Paul Alfille On 6/20/06, Vincent Fleming <[EMAIL PROTECTED]> wrote: > > I had similar problems with the Linux 2.6 kernel's USB driver and the > DS9490. I was really pouring through the code, and it was getting data > errors from the USB. On a whim, I tried it with a 2.4 kernel, and it > worked perfectly. > > When experiencing the 2.6 kernel problems, it looked like the 1-wire > devices "came and went" from the filesystem. One second there were > there, the next, they were gone. > > So, if you're using a 2.6 kernel, try a 2.4 kernel! It works really > well. > > Good luck, > > Vince > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:owfs- > > [EMAIL PROTECTED] On Behalf Of Paul Alfille > > Sent: Monday, June 19, 2006 5:51 PM > > To: [email protected] > > Subject: [Owfs-developers] Fwd: Debug questions > > > > From: Claes Martinsson > > Date: Jun 19, 2006 9:17 AM > > Subject: Debug questions > > To: [EMAIL PROTECTED] > > > > Hello Paul > > > > I have some problems with my 1Wire DS2490 interface (home made > > according to Maxim spec). > > > > It only reads the correct data from the devices (any 1-wire devices) > > 30-40 % of the time. Below is a debug output of a failed read session. > > Appreciate your feedback on what might be wrong. > > > > Also I would like to thank you for all your work with OWFS. It's a > > great piece of software! > > > > > > Best Regards > > > > /Claes Martinsson > > > > > > DATA: DS9490_reset > > > > DATA: DS9490_reset: ok > > > > CONNECT: SELECTION ERROR > > > > DEBUG: READ_POSTPOSTPARSE: > > /uncached/bus.0/10.75C1EF000800/trimblanket return -22 > > > > DEBUG: READ_POSTPARSE /uncached/bus.0/10.75C1EF000800/trimblanket > return > > -22 > > > > DEBUG: ParsedName_destroy > /uncached/bus.0/10.75C1EF000800/trimblanket > > > > CALL: PARSENAME path=[/uncached/bus.0/10.75C1EF000800/trimvalid] > > > > DEBUG: READ_POSTPARSE /uncached/bus.0/10.75C1EF000800/trimvalid > > > > DEBUG: READ_POSTPOSTPARSE /uncached/bus.0/10.75C1EF000800/trimvalid > > > > DEBUG: READSEEK > > > > DEBUG: READSEEK2 pid=20659 not found in cache > > > > CALL: FS_parse_read: format=8 s=1 offset=0 > > > > DEBUG: Selecting a path (and device) > > path=/uncached/bus.0/10.75C1EF000800/trimvalid SN=10 75 C1 EF 00 08 00 > > C2 last path=00 00 00 00 00 00 00 00 > > > > DATA: DS9490_reset > > > > DATA: DS9490_reset: ok > > > > DATA: DS9490_read: failed ret=0 > > > > CONNECT: SELECTION ERROR > > > > DEBUG: READ_POSTPOSTPARSE: /uncached/bus.0/10.75C1EF000800/trimvalid > > return -22 > > > > DEBUG: READ_POSTPOSTPARSE /uncached/bus.0/10.75C1EF000800/trimvalid > > > > DEBUG: READSEEK > > > > DEBUG: READSEEK2 pid=20659 not found in cache > > > > CALL: FS_parse_read: format=8 s=1 offset=0 > > > > DEBUG: Selecting a path (and device) > > path=/uncached/bus.0/10.75C1EF000800/trimvalid SN=10 75 C1 EF 00 08 00 > > C2 last path=00 00 00 00 00 00 00 00 > > > > DATA: DS9490_reset > > > > DATA: DS9490_reset: ok > > > > CONNECT: SELECTION ERROR > > > > DEBUG: READ_POSTPOSTPARSE: /uncached/bus.0/10.75C1EF000800/trimvalid > > return -22 > > > > DEBUG: READ_POSTPOSTPARSE /uncached/bus.0/10.75C1EF000800/trimvalid > > > > DEBUG: READSEEK > > > > DEBUG: READSEEK2 pid=20659 not found in cache > > > > CALL: FS_parse_read: format=8 s=1 offset=0 > > > > DEBUG: Selecting a path (and device) > > path=/uncached/bus.0/10.75C1EF000800/trimvalid SN=10 75 C1 EF 00 08 00 > > C2 last path=00 00 00 00 00 00 00 00 > > > > DATA: DS9490_reset > > > > DATA: DS9490_reset: ok > > > > DATA: DS9490_read: failed ret=0 > > > > CONNECT: SELECTION ERROR > > > > DEBUG: READ_POSTPOSTPARSE: /uncached/bus.0/10.75C1EF000800/trimvalid > > return -22 > > > > DEBUG: READ_POSTPARSE /uncached/bus.0/10.75C1EF000800/trimvalid > return - > > 22 > > > > DEBUG: ParsedName_destroy /uncached/bus.0/10.75C1EF000800/trimvalid > > > > CALL: PARSENAME path=[/uncached/bus.0/10.75C1EF000800/type] > > > > DEBUG: READ_POSTPOSTPARSE /uncached/bus.0/10.75C1EF000800/type > > > > DEBUG: READSEEK > > > > DEBUG: READSEEK2 pid=20659 not found in cache > > > > CALL: FS_parse_read: format=6 s=32 offset=0 > > > > DEBUG: READ_POSTPOSTPARSE: /uncached/bus.0/10.75C1EF000800/type > return 7 > > > > DEBUG: READ_POSTPARSE /uncached/bus.0/10.75C1EF000800/type > > > > DEBUG: READ_POSTPOSTPARSE /uncached/bus.0/10.75C1EF000800/type > > > > DEBUG: READSEEK > > > > DEBUG: READSEEK2 pid=20659 not found in cache > > > > CALL: FS_parse_read: format=6 s=7 offset=0 > > > > DEBUG: READ_POSTPOSTPARSE: /uncached/bus.0/10.75C1EF000800/type > return 7 > > > > DEBUG: READ_POSTPARSE /uncached/bus.0/10.75C1EF000800/type return 7 > > > > DEBUG: ParsedName_destroy /uncached/bus.0/10.75C1EF000800/type > > > > DEBUG: ParsedName_destroy /uncached/bus.0/10.75C1EF000800 > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date: > 6/16/2006 > > > > > > _______________________________________________ > > Owfs-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers > Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
