Hello Paul
Thank you for your fast answer. I tried but without success. I think it
detects correctly the usb-serial adapter but not sure.
Apologize as I'm not an expert in linux module ...
I tried multiple combinations:
/opt/owfs/bin/owserver -d /dev/ttyUSB0
/opt/owfs/bin/owserver -d /dev/ttyUSB1
/opt/owfs/bin/owserver -d /dev/ttyUSB2 ...
results:
DEFAULT: ow_arg.c:(72) Cannot access device /dev/ttyUSB0
Here is my config:
results of dmesg:
[1251823.620000] usb 1-1.3: new full speed USB device using orion-ehci and
> address 6
> [1251823.730000] Got empty serial number. Generate serial number from
> product.
> [1251823.740000] usb 1-1.3: configuration #1 chosen from 1 choice
I tried USB6 without success too.
lsusb:
DiskStation211> lsusb
> Bus 001 Device 006: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
> Port
> Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Bus 001 Device 001: ID 1d6b:0002
DiskStation211> cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
> B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=1d6b ProdID=0002 Rev= 2.06
> S: Manufacturer=Linux 2.6.32.12 ehci_hcd
> S: Product=Marvell Orion EHCI
> S: SerialNumber=orion-ehci.0
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=05e3 ProdID=0608 Rev=77.63
> S: Product=USB2.0 Hub
> S: SerialNumber=d6a3ebcbfbd5e7a5f6a3
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
> T: Bus=01 Lev=02 Prnt=02 Port=99 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=067b ProdID=2303 Rev= 3.00
> S: Manufacturer=Prolific Technology Inc.
> S: Product=USB 2.0 To COM Device
> S: SerialNumber=d1b2dbadc88cace1aeedcda2f6d6e6c8
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I'm a bit lost... Hope you can help me ?
thank you
Thomas
2012/10/31 Paul Alfille <[email protected]>
> The Hobby Board hub master 6 channel is really a slave -- DS2409 based /
> family code 1F -- and thus doesn't appear on the command line. The devces
> will show up automatically in a directory listing.
>
> The USB to serial conversion is done by the operating system, and not seen
> by owfs. Usually the serial port created has a name like /dev/ttyUSB0 but
> look at the output from the command 'dmesg' to see.
>
> Thus, if it's a standard serial bus master:
>
> /opt/owfs/bin/owserver -d /dev/ttyUSB0 -p 4304
>
> The "-p 4304" is the default and not really needed.
>
> Paul Alfille
>
> On Tue, Oct 30, 2012 at 6:44 PM, Thomas Parvais [email protected]
> wrote:
>
> Hello
>
> If I want to use the master hub with a serial to USB adapter, which
> command should I use to launch owserver ?
> Thank you
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/owfs/discussion/292718/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/prefs/
>
> ------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/owfs/discussion/292718/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/prefs/
>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
