Hi to all, problem fixed.
I installed a old image with a older kernel version and the owserver runs. After that i notice a cable failure, all of my 1-wire clients where shown (two (temperture sensor at the beginning). Then i reinstalled the image with the actual version (updated raspi and owserver 3.1p0, compile on this raspberry) and it runs also. Thanks for help Ritchie > Hi to all, > > now i used a complet new installation (complete update) and get the same > result. Even when I enter the following command, no response from the > owserver. > > $ sudo ./owserver --debug -c /etc/owfs.conf > DEBUG MODE > libow version: > 2.8p15 > $ sudo ./owserver --debug --i2c=/dev/i2c-1 > DEBUG MODE > libow version: > 2.8p15 > $ sudo ./owserver --debug --i2c=all > DEBUG MODE > libow version: > 2.8p15 > > Command prompt is comming directly. But it works with FAKE server still. > > Best regards > > Ritchie > >> Hi, >> >> I just want to test my test environment and noticed, that the stable >> owserver did not start. I noticed, that after a updated of the raspberry >> the i2c bus does not run anymore (even not seen). Most of the points I >> already fixed, but I stuck at this point. >> >> I already have done the following steps. >> >> $ lsmod >> Module Size Used by >> rtc_ds1307 10347 0 >> i2c_dev 6709 0 >> snd_bcm2835 21342 0 >> snd_pcm 93100 1 snd_bcm2835 >> snd_timer 23007 1 snd_pcm >> snd 67211 3 snd_bcm2835,snd_timer,snd_pcm >> i2c_bcm2708 6200 0 >> uio_pdrv_genirq 3666 0 >> uio 9897 1 uio_pdrv_genirq >> sg 21787 0 >> >> $ i2cdetect -l >> i2c-1 i2c 20804000.i2c I2C adapter >> >> $ ls -l /dev/i2c-* >> crw-rw---T 1 root i2c 89, 1 Apr 5 12:03 /dev/i2c-1 >> >> $ sudo i2cdetect -y 1 >> 0 1 2 3 4 5 6 7 8 9 a b c d e f >> 00: -- -- -- -- -- -- -- -- -- -- -- -- -- >> 10: -- -- -- -- -- -- -- -- 18 -- -- -- -- -- -- -- >> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- >> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- >> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- >> 50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- -- >> 60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- -- >> 70: -- -- -- -- -- -- -- -- >> $ >> here is the owfs.conf file >> # configuration file for the OWFS suite for Debian GNU/Linux. >> # >> # >> # This is the main OWFS configuration file. You should read the >> # owfs.conf(5) manual page in order to understand the options listed >> # here. >> ######################## SOURCES ######################## >> # With this setup, any client (but owserver) uses owserver on the >> # local machine... >> ! server: server = localhost:4304 >> # >> # ...and owserver uses the real hardware, by default fake devices >> # This part must be changed on real installation >> #server: FAKE = DS18S20,DS2405 >> # >> # i2b bus 1 of rev. b of the raspberry >> server: device = /dev/i2c-1 >> >> ####################### OWHTTPD ######################### >> http: port = 2121 >> ####################### OWFTPD ########################## >> ftp: port = 2120 >> ####################### OWSERVER ######################## >> server: port = 127.0.0.1:4304 >> >> >> $ sudo /etc/init.d/owserver start >> [FAIL] Starting 1-Wire TCP Server: owserver failed! >> >> But when I configure the "FAKE" device, the owserver is running. >> >> I would like to add more information from the owserver with the >> parameters, but I do not see any additional information. >> >> start-stop-daemon --start --quiet --oknodo --exec $DAEMON -- -c $CONFFILE \ >> --pid-file $PIDFILE --error_print=2 --error_level=5 >> >> >> Can anybody help me. >> >> Best regards >> >> Ritchie >> >> ------------------------------------------------------------------------------ >> Dive into the World of Parallel Programming The Go Parallel Website, >> sponsored >> by Intel and developed in partnership with Slashdot Media, is your hub for >> all >> things parallel software development, from weekly thought leadership blogs to >> news, videos, case studies, tutorials and more. Take a look and join the >> conversation now. http://goparallel.sourceforge.net/ >> _______________________________________________ >> Owfs-developers mailing list >> Owfs-developers@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/owfs-developers >> > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
