I went down this route with my Fibre to Home (yes I'm one of the rare ppls
that has pure fibre 100mb/sec connection to my house) and the more i talked
to people about it the more I was left to be believe that Gigabit approach
was more realistic in cost effective / workable way.

eg:
http://www.stress-free.co.nz/gigabit_vs_fibre_channel_discussion

<http://www.stress-free.co.nz/gigabit_vs_fibre_channel_discussion>
---
Regards,
Scott Barnes
http://www.riagenic.com


On Wed, Apr 20, 2011 at 10:23 AM, David Boccabella <
davidboccabe...@anubis-systems.com> wrote:

> Hi folks
>
>
>
> Ok.. I am in the process of setting up a small FC private network that will
> be used between  3 PC’s (VM Hosts) and a SANs box.
>
>
>
> I have purchased 2 x 4 port and 6 x 1 port  FC HBA’s  I have also purchased
> second hand a  Brocade 3200  hub.
>
>
>
> Unfortunately it looks like I will need to purchase additional licensing
> for the Brocade for it to do ‘Trunking’ and this is an obsolete hub.
>
>
>
> With standard CAT-5 it is possible to use a crossover cable to connect PC
> to PC without the need of a hub, and if one has multiple NIC’s then one can
> pair them together to increase the bandwidth.
>
>
>
> But with FC I cannot find much reference to this but I am sure it can be
> done.  If I cannot get the Hub to Trunk  can I then just drop in the 2 x 4
> port HBA’s into the SAN  PC  which will give me 8 ports.. And then pair them
> together to give me  4  dual speed ports.  Then put 2 HBA’s into each VM
> Host and pair those back to the  SANs box.
>
>
>
> Any suggestion how to do this?, do I need to take part cables or are their
> adapters that will do it.
>
>
>
> Many thanks
>
> Dave
>
>
>
>
>
>
>
> ********************************************************************
> David J. Boccabella
>
> Proprietor
> Anubis Systems
> Phone: 0433 808 525
>
> Fax: 3200 0085
> Email:  davidboccabe...@anubis-systems.com <boo...@cvsol.com>
>
> This e-mail and it's contents is confidential to Anubis Systems.
> This e-mail, any attachments, or any part of can not be reproduced
> without the express written permission of Anubis Systems
> ********************************************************************
>

Reply via email to