Assuming you are using R6, the latest debugger plugins should work much
better. They are at ftp://palm:[EMAIL PROTECTED]. But that said
though, if the system is extremely busy (e.g. building the CodeWarrior IDE
:-) and you are trying to debug at the same time connections can still
fail. But let me know the details about it. Believe me, if I had a magic
bullet to fix this problem, I would have used it. Sigh..:-(
Rgds,
Jun-Kiat Lam
Metrowerks Technical Support
At 06:49 PM 8/17/2000 -0400, DIAMOND JEFF wrote:
>I am using the debugger with a IIIc and POSE, and I've found the
>connection EXTREMLEY buggy (usually I have an 80% failure rate), and
>that didn't change with the latest update.
>
>Here are things I do to attempt to connect to a debug device, in orders
>of increasing desperation:
>
>=> Disable all breakpoints, or if none are enabled, enable one. (This
>works some of the time.)
>=> Reset the device.
>=> In POSE, load a fresh ROM
>=> Completely rebuild my project
>=> Close CodeWarrior and reopen it.
>
>In general, I never expect to get too many successful connections before
>i have to reload Codewarrior.
>
>It's inconvenient, and on a larger project the rebuilds would REALLY be
>a pain, but when I perservere like this I can usually get a debug
>connection often enough to do some basic test runs.
>
>Now, I'm not using a visor, but maybe some of this will help.
>
>- Jeff
>
>
>Dan Samber wrote:
> >
> > Until now, I have been happily debugging my programs on my Visor.
> > >From everything I read, it seems like I should be able to step through
> > my code and use the Codewarrior debugger on POSE instead.
> >
> > So far..... nuttin! Either I get a "failed to connect to remote" or some
> > mysterious error number from Codewarrior. I thought that all I'd have to
> > do was have POSE running and have my palm connection setting set
> > to "emulator". I even tried writing the infamous shortcut .. 2 into POSE
> > (which is what I do on my Visor to put it into console mode).
> >
> > I have read GOBS of documentation on the debugger itself... to no avail!
> >
> > Please help me save my batteries!
> >
> > Thanks,
> >
> > Dan
> >
> > --
> > For information on using the Palm Developer Forums, or to unsubscribe,
> please see http://www.palmos.com/dev/tech/support/forums/
>
>--
>For information on using the Palm Developer Forums, or to unsubscribe,
>please see http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
