Sadly, I have the most current updates. :(
But I'm glad to see I'm not the only one who tried that stuff. :)
[EMAIL PROTECTED] wrote:
>
> I have tried almost everything that Jeff is telling an more:-) Like, closing
> Constructor used to help sometime and touching the project file used to
> help sometime. But what worked best for me were the patches from Metrowerks
> website. I used to have CodeWarrior for Palm Computing Release 5. I had
> to get patches 5.1 and 5.2 (YOU HAVE TO GET BOTH UPDATES IF YOU DON'T
> ALREADY) and a lot of my problems got solved.
>
> Good luck!!
>
> Subu Iyer
> Compaq Computer Corp.
>
> > Sender: [EMAIL PROTECTED]
> > From: DIAMOND JEFF <[EMAIL PROTECTED]>
> > Date: Thu, 17 Aug 2000 18:49:14 -0400
> > To: "Palm Developer Forum" <[EMAIL PROTECTED]>
> > Subject: Re: Codewarrior Debugging with POSE
> >
> > I am using the debugger with a IIIc and POSE, and I've found the
> > connection EXTREMLEY buggy (usually I have an 80% failure rate), and
> > that didn't change with the latest update.
> >
> > Here are things I do to attempt to connect to a debug device, in orders
> > of increasing desperation:
> >
> > => Disable all breakpoints, or if none are enabled, enable one. (This
> > works some of the time.)
> > => Reset the device.
> > => In POSE, load a fresh ROM
> > => Completely rebuild my project
> > => Close CodeWarrior and reopen it.
> >
> > In general, I never expect to get too many successful connections before
> > i have to reload Codewarrior.
> >
> > It's inconvenient, and on a larger project the rebuilds would REALLY be
> > a pain, but when I perservere like this I can usually get a debug
> > connection often enough to do some basic test runs.
> >
> > Now, I'm not using a visor, but maybe some of this will help.
> >
> > - Jeff
> >
> >
> > Dan Samber wrote:
> > >
> > > Until now, I have been happily debugging my programs on my Visor.
> > > >From everything I read, it seems like I should be able to step through
> > > my code and use the Codewarrior debugger on POSE instead.
> > >
> > > So far..... nuttin! Either I get a "failed to connect to remote" or some
> > > mysterious error number from Codewarrior. I thought that all I'd have to
> > > do was have POSE running and have my palm connection setting set
> > > to "emulator". I even tried writing the infamous shortcut .. 2 into POSE
> > > (which is what I do on my Visor to put it into console mode).
> > >
> > > I have read GOBS of documentation on the debugger itself... to no avail!
> > >
> > > Please help me save my batteries!
> > >
> > > Thanks,
> > >
> > > Dan
> > >
> > > --
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
