No, shouldn't be a problem but you'd really need to repeat the burn to see
if you have a real issue or whether the problem was due to faulty media.
Regards.
Kevin Lloyd
E-mail: kevin.llo...@sky.com
----- Original Message -----
From: "DJ DOCTOR P" <djdoct...@att.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Tuesday, March 30, 2010 3:36 PM
Subject: Re: CD BURNING QUESTION
Hello Kevin,
The files that I burned to CD using both peaces of software, are PCM
uncompressed wave files.
They are also 96000 KHZ 32 bit-stereo which is the format that I recorded
them in.
WMP 10 shouldn't have a problem with those types of files, should it?
John.
----- Original Message -----
From: "Kevin Lloyd" <kevin.llo...@sky.com>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Tuesday, March 30, 2010 3:47 AM
Subject: Re: CD BURNING QUESTION
Try burning it again with windows media player. The problem is most
likely with the media or as another poster has suggested, the writing
speed. Depending what format your music is in, there will probably have
been a conversion to write it to a standard audio CD but it's unlikely
that you would hear a difference in the results between the two programs.
Kevin Lloyd
E-mail: kevin.llo...@sky.com
----- Original Message -----
From: "DJ DOCTOR P" <djdoct...@att.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Tuesday, March 30, 2010 5:53 AM
Subject: Re: CD BURNING QUESTION
High Garry,
What I'm hearing, are distorted pops in the right speaker of any stereo
that I play the CD on.
But that is the one that I burned using WMP 10.
But the CD I burned using Express Burn, doesn't sound like that.
I should point out, that the CD that was burned using WMP 10, has a kind
of dull sound.
But the CD that was burned using Express Burn, sounds like, it came
right out of the studio.
What's up with that?
John.
----- Original Message -----
From: "Gary Schindler" <garys5...@comcast.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Monday, March 29, 2010 7:06 PM
Subject: Re: CD BURNING QUESTION
I suggest that the media that you are using can't handle a faster
writing speed, therefore the burner in media player writing speed is to
fast. I don't know of a way to slow down the burner using media player.
I guess it sounds scratchy or something?
----- Original Message -----
From: "DJ DOCTOR P" <djdoct...@att.net>
To: "PC audio discussion list. " <pc-audio@pc-audio.org>
Sent: Monday, March 29, 2010 2:15 PM
Subject: CD BURNING QUESTION
Hello list members,
I used Windows Media Player 10 to burn an audio CD.
But when I played it back on my stereo, I heard degradation in the
right speaker.
I thought I was hearing things, so I tried the CD on another stereo
that I have here in the house.
Needless to say, I heard the same thing on that one too as well.
Even the highs weren't sounding the way they're suppose to.
But when I used Express Burn to burn those same files to CD, I didn't
hear what I heard on the first one that was burned by Windows Media
Player 10.
My question is, why is this happening with one CD burning software and
not the other one?
Thinks in advance.
John.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
