Danny, there's no difference in editing capabilities between sound forge
and goldwave. As someone else has said, if you are picking up mouth
noises and noise from your braille display, perhaps hyou should think
about swithcing to a different microphone which might be lsee sensitive
and have a different pickup pattern. For example, a dynamic microphone
with a cardioid pattern might help in this situation.
\On 3/10/2015 3:24 PM, Danny Miles wrote:
Hi Tina. Thanks very much for this info.
Do you feel that SF is better than GW or are they pretty comparable?
Anybody else's thoughts on this would also be appreciated. Of course
buying SF would be a considerable outlay, but it is in the cause of
professional work, so I guess it depends whether there's a significant
advantage to it or not.
Also, as previously mentioned, I currently record my audio via the Sam
broadcasting encoders and simply edit in GoldWave. Is this advisable
or would it be better to simply do everything in an audio editing
package?
Danny
On 3/10/15, Tina Wilson <tinatee...@cox.net> wrote:
Hello Danny,
In order to receive the scripts for Sound Forge, send an email to Jim
Snowberger at:
snow...@snowmanradio.com. He charges $30, and he's a great guy. Hope this
helps.
Tina
-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Danny
Miles
Sent: Tuesday, March 10, 2015 12:15 PM
To: PC Audio Discussion List
Subject: Re: Editing Mouth Noise and Braille Display Clicks
Hi Jamie. Thanks for your message.
I'm using a Shure SM58, which I understand to be one of the most
commonly-used all-purpose vocal mics. I plug my mic into a mixer rather
than using a USB mic ... do you have any better suggestions? I do use a pop
shield, so I don't have issues with plosives, but the Braille display and
mouth noises seem more evident than I expected.
Also, I wasn't aware that there were Jaws scripts for Sound Forge. I used
SF before I started with GoldWave many years ago and, generally, I think
GoldWave works just as well. However, if you can please advise on how to
obtain the scripts for SF it might be worth contemplating.
Many thanks, Danny
On 3/10/15, Jamie Kelly <otrja...@gmail.com> wrote:
You could try Sound Forge and with the Jaws scripts you can use the
EQ, shift and pitch sliders Etc.
If you have some vision, Adobe Audition is very good also if it's
still available. Both these programs cost around $300 to $400 each.
Also look at the type of mike your using.
Jamie
-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of
Danny Miles
Sent: Tuesday, 10 March 2015 9:09 PM
To: PC Audio Discussion List
Subject: Editing Mouth Noise and Braille Display Clicks
Hello everyone. I wonder if anybody can please advise.
I currently record using a broadcasting encoder and edit my content
using GoldWave. However, I'm having significant issues with the
presence of mouth clicks and the constant sounds of my Braille display
as I move from line to line (or as the cursor flashes).
I find that GoldWave's editing options are generally too weak to have
any impact or too aggressive to leave a high-quality recording. I
currently have Depopper; could this be used to remove the issues
described above (and also the hiss of room ambience)? If so, any
advice on particular settings would be appreciated. If not, can
anybody please make any other suggestions?
Many thanks, Danny
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
