Hi all,
I recently dug out my old old PowerCenter 132 as I found a Newer Tech MaxPowr 225 accelerator card that fits it.
After some guidance on dip switch settings I have the thing installed and the machine boots just fine.
Now I have a couple of questions. First, system profiler now says the CPU is a 604e @ 241 MHz. Is that correct? I thought the card was a G3. Shows my lack of Mac knowledge. ;)
Second question. I set the DIP switches (all 4 up) per the suggestion of another list. What I would like to know is what does each setting on the DIP do? Trying to find this info via Google was a bust and OWC's web site is less than helpful.
Last question. Do I need to reset the CUDA switch?
Thanks!
-- Mike N
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
