I was under the impression all along that you *did* have, *HAD* the refresh drop-down box and it just disappeared after installing the new monitor. -Clint
God Bless Clint Hamilton, Owner http://OrpheusComputing.com ) http://ComputersCustomBuilt.com ----- Original Message ----- From: "John O'Flynn" <[EMAIL PROTECTED]> Roger, you've done it! Bless you, and bless you again!!! This surely is what lists like this are for. In a couple of clicks I've done what I spent hours and hours trying to figure out how to do. It never occurred to me to look under Adapter. Thanks for your encouragement, Lynne, but there really was a flicker, and now it's gone. So now I'm gonna kick back, and whatever other things you recommended :) And thanks Clint for your patience. John ----- Original Message ----- From: "Roger" > John, > > I use WIN98SE with a Hansol 17" Monitor and an older ATI AGP > Xpert 98 Adapter. To set the refresh rate on my monitor, I > R-click on desktop >Properties >Settings tab >Advanced > button > and ADAPTER, not Monitor tab. I generally run it at 85 Hz > refresh. > > We all have different configs though, so see if you have an > adapter tab. > > Roger ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
