Yes I do it all the time. Use Norton Ghost via floppy disk boot. Make sure when the process is complete to disconnect the RAID array BEFORE rebooting. Remove the floopy disk and allow system to boot to only the new single drive. It will be an exact clone of the original raid array.
Bob Waterman, CET. #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX [EMAIL PROTECTED] ----- Original Message ----- From: "Ben Moore" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, May 23, 2005 7:49 AM Subject: PCWorks: Restoring an imaged Raid 0 > Good Morning, > > Does anyone on the list have any experience with Raid arrays and imaging > software. What I want to do is break a raid 0 array and convert it to a > single drive non raid system keeping everything and not having to rebuild > the O/S. I can image the array with Drive Image but can I restore the image > to a single drive that is not in a Raid array and get it to work? Has > anyone ever tried it? > > Thanks > > Ben ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
