With the power off on the iWay, connect to the usb. Then turn on the
power. I have an iWay 500 and was able to do the update on mine without
a problem, but have not connected again. I do find on some devices,
that having the power off (make sure that any usb connections that have
the yellow exclaimation mark are removed before you make the connection)
when connecting and then powering up will help.
Keith
LarryB wrote:
I tried that Hugh and found that all my drives were turned on. I just
tried the device again and all I get is the USB device not recognized
message and when I click the message nothing show up in the window.
When I go to the device manager and try to look at the USB info the
winddow jumps vertically and you can't read it.
Strange thing and so far restarting and restoring to a latter time
does not work.
LarryBrowning
K & L Electronics
Hugh Vandervoort wrote:
Get tweakui and make sure you have enough drives enabled under My
Computer.
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
In some cases a drive letter is over-written and can't be used again
after a USB device is connected.
I'm not sure why this should be so, but it's helped other people in
the same situation.
LarryB wrote:
I have a device that is recognized on one of my computers using the
Windows XP while the other computer will not recognize this device.
It will recognize other devices though. I was going to delete the
USB items in the device manager but because I am using wireless
Logitech keyboard and mouse I would be unable to use the computer
anymore. When I install the device then go to device manager it
shows up as "unknown device" and I have tried installing other
drivers but nothing seems to help. There is no software with the
device. (the device is a Iway 350 gps)
Thanks
--
Keith Thompson, Worthington, OH
Home Web Page: http://freepages.family.rootsweb.com/~kthompson/
Genealogy Web Page: http://freepages.genealogy.rootsweb.com/~kthompson
Here today, dawn tomorrow.
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
