4 - COM4 (in use)
Antoine Rousseau schreef op 24-04-2020 17:40:
> what does:
>
> [devices(
> |
> [comport]
>
> return ?
>
> Antoine Rousseau
> http://www.metalu.net [1] __ http://www.metaluachahuter.com/ [2]
>
> Le ven. 24 avr. 2020 à 16:38, <ro...@dds.nl> a écrit :
>
>> i've been working with the Arduino UNO and Pd for years.
>> now i'm starting with a new board UNO Wifi Rev2.
>>
>> the board works with the Arduino IDE, also with the IDE's serial monitor.
>>
>> the problem with Pd is in the initialization.
>>
>> when the board is powered on and i open the port in Pd, nothing happens. no
>> 'hello world' or whatever comes through, no lights on the board show any
>> activity.
>>
>> [comport] doesn't give any error message.
>>
>> when i close the port in Pd, go to the IDE, start the serial monitor, the
>> board comes alive, spits out the text.
>> closing the IDE, opening the port in Pd again, dadada, the text shows up.
>> as long as the board stays plugged in, the communication gives no problems.
>>
>> in Windows 10 the port for a 'regular' UNO appears as "Arduino UNO (COM5)".
>> the new board as "mEDBG Virtual COM Port (COM4)".
>>
>> is it possible that [comport] fails to initialize this particular type?
>>
>> rolf _______________________________________________
>> Pd-list@lists.iem.at mailing list
>> UNSUBSCRIBE and account-management ->
>> https://lists.puredata.info/listinfo/pd-list
Links:
------
[1] http://metalu.net
[2] http://www.metaluachahuter.com/compagnies/al1-ant1/
_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management ->
https://lists.puredata.info/listinfo/pd-list