Martin Peach schreef op 24-04-2020 19:44:
On Fri, Apr 24, 2020 at 1:34 PM <ro...@dds.nl> wrote:
Martin Peach schreef op 24-04-2020 18:51:
> On Fri, Apr 24, 2020 at 10:40 AM <ro...@dds.nl> wrote:
>>
>> i've been working with the Arduino UNO and Pd for years.
>> now i'm starting with a new board UNO Wifi Rev2.
...
(with the regular UNO this behavior doesn't happen)
i'm not sending anything at startup.
this is what [info) gives:
print: open 1
print: port 5
print: baud 9600
print: dsr 0
print: cts 0
print: parity 0
print: stop 1
print: data 8
print: rtscts 0
print: xonxoff 0
print: hupcl 1
print: rxerrors 0
Here I get the same thing with a functional device except I have cts
1. Do you get that with the UNO?
You could try sending [dtr 1( or [rtscts1( and [rts 1( to see if it
wants some hanshaking.
Martin
wow, [dtr 1( did the trick!
what does it mean?
can i do this also when there's no problem like with the regular UNO?
(because the Pd patches are running on different machines with different
boards)
@antoine
i was wrong about (in use)
when 2 Pd's have a comport connection [info( gives this:
4 - COM4 (in use)
5 - COM5 (in use)
rolf
_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management ->
https://lists.puredata.info/listinfo/pd-list
