It's this one:
http://www.bogentripodparts.com/parts/head3433-01.htm
The alternative I've been considering is to replace the top plate (part
"B" on this page, aka R501,05), the 3rd image down, right after the QR)
with an Arca-Swiss clamp.
Note the scale: this plate is about 3.5"x3.5".
Igor
Paul Stenquist Mon, 10 Apr 2017 18:47:21 -0700 wrote:
I'm not familiar with that head but I was able to replace a Manfroto QR
plate on one of my ball heads. It was retained with a substantial socket
head screw, so I merely removed the screw and installed an Arca QR plate.
Paul via phone
On Apr 10, 2017, at 9:38 PM, Igor PDML-StR wrote:
Well, while I see what you mean (operator's error), - but the idea
is to minimize the inventory and the complexity.
I would like to be able to switch quickly between the tripod (for taking a
video) and a monopod (for stills) at a kids' sport event.
I already have a sturdy (video) tripod with a nice fluid head (Manfrotto
3433 aka 501) that accepts RC5 plates. For the monopod, I don't want to buy a
head that would accept RC5 (even if there is one suitable for monopods, which
I actually doubt). So, I'd like to "bring them to a common denominator", so
to speak.
So, the easiest would be to install such an adapter in the existing tripod
"permanently", and only remove the QR plate (or an L-bracket). Also, the
advantage of this is that I can swap two cameras on the tripod or monopod if
I'd need to, - without necessity to have two sets of each type of plates.
I also was considering if I could remove the clamp part on the 501 head and
replace it with one that accepts Arca Swiss QR plates. But so far I don't see
how that can be done (without drilling/cutting).
Igor
Paul Stenquist Mon, 10 Apr 2017 16:11:54 -0700 wrote:
It's easy to swap the QR plates. I would worry about clamping one into the
other. You're doubling the chance of failure.
Paul via phone
On Apr 10, 2017, at 7:07 PM, Igor PDML-StR wrote:
I wonder if there are any "adapters" that would have the bottom as a QR
plate for one of the Manfrotto heads, and on top would be a clamp accepting
Arca Swiss plates?
I am particularly interested in RC5 but I am curious if these type of
beasts exist at all.
Note, I am not looking for "dual" plates. (I believe I've seen
such for RC2 + Arca Swiss...)
Igor
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.