Re: [PEDA] Bypass capacitors

[Harry Selfridge]

You don't say what version of software you are using.  If it is Protel99SE, 
open the PCB file, go to File>CAM Manager, follow the wizard and select BOM 
as the output, you can then press F9 to generate the BOM or you can go to 
Tools>Generate CAM Files.  Your BOM will be generated for all the 
components on the board.

If you are working with DXP2004, open the PCBDOC, go to Reports>Bill of 
Materials.

There are various add-ins, scripts, etc to tailor the BOM.  The above is 
just the barebones way of getting the basic report.

At 12:15 PM 5/6/05, you wrote:
The bypass capacitors for each of the IC's in a project I've taken over
are displayed on the PCB Layout view but not on the BOM or the
schematic.  How do I get those components listed on the BOM?
snip

____________________________________________________________
You are subscribed to the PEDA discussion forum
To Post messages:
mailto:PEDA@techservinc.com
Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/proteledaforum@techservinc.com
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/peda@techservinc.com