[EMAIL PROTECTED] wrote: >Hello out there, > >I have the following problem: When I changed something within my schematic - >e.g. using another pin-compatible memory-IC - there are many tracks in my >layout, who's netnames got lost. > >So: If I mount the new (pin-compatible) IC to the same position (and >orientation), all those old connection could be recycled. But I receive many >DRC-errors, because of the lost netnames. Of course I could assign the correct >netnames to the tracks, but this is more work than placing the tracks again. > >Is it possible to re-assign only one track's correct netname and let protel >assign the same netname to all tracks, vias, etc. that have a 'physical' >connection to the initial-track? > >So that the re-assigned netname 'pours' through my layout...? > >I work with protel 99SE SP6 > >Have a nice weekend! > >Kind regards >Christian > > >____________________________________________________________ >You are subscribed to the PEDA discussion forum > >To Post messages: >mailto:[email protected] > >Unsubscribe and Other Options: >http://techservinc.com/mailman/listinfo/peda_techservinc.com > >Browse or Search Old Archives (2001-2004): >http://www.mail-archive.com/[email protected] > >Browse or Search Current Archives (2004-Current): >http://www.mail-archive.com/[email protected] > > > Christian,
It appears you need to "update free primitives from compomemt pads". Go To Design, Netlist Manager, Menu and select "update free primitives from compomemt pads". Regards, Jim McGrath ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
