When I do a polygon plane pour and I set the clearance to 0 mils the pour leaves large square gaps around my mounting holes.
I need a solid plane because I am using it is as a ground plane for an antenna. If I set the clearance to 1 mil then the plane no longer has large gaps but has a small 1 mill gap around my mounting holes like it should but I don't want that 1 mil gap. Why does it work with 1 mil but not 0 mil clearance. I can get around this by placing my ground plane and then adding my mounting holes later but I would rather my polygon worked properly so I don't have to move my mounting holes every time I "rebuild" my polygon. Trentino ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
