Hello, Kris, for a pragmatic approach, you might consider trying this:
* Gather all the open time servers you can find, no matter where they are located, and, for starters, configure them ALL. * Let your ntpd run with that configuration and don't touch it for many hours, preferably a few days. * Then check which time servers give you good results. If you want to be elaborate about it, check several times. * Finally, remove most servers and keep only the four or five best ones. In my experience, an excellent tool to find which time servers are good time servers for a network location is a time server, running at that location. :-) I came up with the configuration of my time server via a similar approach (though I did restrict my initial configuration to a handful of German servers), and am very pleased with the precision I have. I would be surprised indeed if you find it difficult to come up with some time server selection that makes your server precise enough to be allowed into the pool. Best regards (and, of course, a warm "welcome to the club"!) Andreas Am 10.10.2012 01:31, schrieb IT2GO: > Dear, > > I've got a server in Egypt (s01.eg.it2go.eu) and i would like to install a NTP > server on it. Everything went well, but i can't find any NTP stratum 1 or 2 > server in Egypt (or around) to sync with. > > Anyone that have some idea's? I've already tried the two wiki pages (stratum > one and stratum two) on pool.ntp.org but there isn't mentioned one in Egypt. > > Thanks for any help! > > Kris > _______________________________________________ > pool mailing list > [email protected] > http://lists.ntp.org/listinfo/pool _______________________________________________ pool mailing list [email protected] http://lists.ntp.org/listinfo/pool
