2013/8/21 Pascal Stumpf <pascal.stu...@cubes.de>: > On Tue, 28 May 2013 11:12:10 +0200, David Coppa wrote: >> On Sun, 05 May 2013, Gregor Best wrote: >> >> > Hi ports@, >> > >> > attached is a slightly updated version of the audio/mumble port David >> > Coppa submitted in April 2012. I fixed two things related to the >> > deprecation of PERMIT_DISTFILES_CDROM and NO_REGRESS. Also, I fixed a >> > typo in WANTLIB (it said sndfile>=4 instead of >=3) and removed the >> > -sqlite from the qt4 dependency because as far as I can see sqlite is >> > now always included in qt4. >> > >> > The port builds and runs fine since ... a long time ago, I've been >> > testing it for about 4 months now. >> > >> > I've kept the name for the tarball in sync with the last name David sent >> > to ports@, so this is version 5 of the port. >> > >> > -- >> > Gregor Best >> >> >> Hi all again, >> >> Here's my "final" version. >> This is what I'd like to import, please have a look at it. >> >> Ciao! >> David >> >> >>>> application/x-tar-gz attachment, name=mumble-v6.tgz > > Hi, > > here's a newer version (1.2.4), tested lightly on amd64. Some patches > disappeared because we now have shm_open() or they came from upstream > anyway.
Quick review: * Use ALL_TARGET in port Makefile instead of constructing do-build. * Use lib/qt4/Qt* instead of Qt* in WANTLIB. * Packages fine, starts fine but no sound in either way (audioctl and mixerctl output below). -- WBR, Vadim Zhukov $ audioctl -a name=HD-Audio version=1.0 config=azalia0 encodings=slinear_le:16:2:1,slinear_le:20:4:1,slinear_le:24:4:1 properties=full_duplex,independent full_duplex=0 fullduplex=0 blocksize=3840 hiwat=9 lowat=8 output_muted=0 monitor_gain=0 mode= play.rate=48000 play.channels=2 play.precision=16 play.bps=2 play.msb=1 play.encoding=slinear_le play.gain=247 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=0 play.samples=0 play.eof=0 play.pause=1 play.error=0 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 play.block_size=3840 play.errors=0 record.rate=48000 record.channels=2 record.precision=16 record.bps=2 record.msb=1 record.encoding=slinear_le record.gain=126 record.balance=32 record.port=0x0 record.avail_ports=0x0 record.seek=0 record.samples=0 record.eof=0 record.pause=1 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.block_size=3840 record.errors=0 $ mixerctl -a inputs.dac-0:1_mute=off inputs.dac-0:1=222,222 inputs.dac-2:3_mute=off inputs.dac-2:3=222,222 inputs.beep=108 record.adc-0:1_source=mic2 record.adc-0:1_mute=off record.adc-0:1=126,126 record.adc-4:5_source=mic2 record.adc-4:5_mute=off record.adc-4:5=126,126 record.adc-2:3_source=sel2 record.adc-2:3_mute=off record.adc-2:3=126,126 inputs.sel_source=mic outputs.sel=126,126 inputs.sel2_source=mic outputs.sel2=126,126 outputs.hp_source=dac-0:1 outputs.hp_boost=off outputs.mic_source=dac-0:1 outputs.mic_dir=input-vr80 outputs.mic_eapd=on outputs.spkr_source=dac-2:3 inputs.mic2=126,126 inputs.mix_source=dac-0:1,dac-2:3 inputs.mix_dac-0:1=126,126 inputs.mix_dac-2:3=126,126 outputs.hp_sense=unplugged outputs.mic_sense=unplugged outputs.spkr_muters=hp,mic outputs.master=247,247 outputs.master.mute=off outputs.master.slaves=dac-0:1,dac-2:3 record.volume=126,126 record.volume.mute=off record.volume.slaves=adc-0:1,adc-4:5,adc-2:3
