On Wed, 21 Aug 2013 22:00:09 +0400, Vadim Zhukov wrote: > 2013/8/21 Pascal Stumpf <pascal.stu...@cubes.de>: > > On Tue, 28 May 2013 11:12:10 +0200, David Coppa wrote: > >> On Sun, 05 May 2013, Gregor Best wrote: > >> > >> > Hi ports@, > >> > > >> > attached is a slightly updated version of the audio/mumble port David > >> > Coppa submitted in April 2012. I fixed two things related to the > >> > deprecation of PERMIT_DISTFILES_CDROM and NO_REGRESS. Also, I fixed a > >> > typo in WANTLIB (it said sndfile>=4 instead of >=3) and removed the > >> > -sqlite from the qt4 dependency because as far as I can see sqlite is > >> > now always included in qt4. > >> > > >> > The port builds and runs fine since ... a long time ago, I've been > >> > testing it for about 4 months now. > >> > > >> > I've kept the name for the tarball in sync with the last name David sent > >> > to ports@, so this is version 5 of the port. > >> > > >> > -- > >> > Gregor Best > >> > >> > >> Hi all again, > >> > >> Here's my "final" version. > >> This is what I'd like to import, please have a look at it. > >> > >> Ciao! > >> David > >> > >> > >>>> application/x-tar-gz attachment, name=mumble-v6.tgz > > > > Hi, > > > > here's a newer version (1.2.4), tested lightly on amd64. Some patches > > disappeared because we now have shm_open() or they came from upstream > > anyway. > > Quick review: > > * Use ALL_TARGET in port Makefile instead of constructing do-build. > * Use lib/qt4/Qt* instead of Qt* in WANTLIB. > * Packages fine, starts fine but no sound in either way (audioctl and > mixerctl output below).
Updated tarball attached; I don't know about your audio problem, I suppose there's nothing useful on the console? Tried re-running the audio wizard? > -- > WBR, > Vadim Zhukov > > > $ audioctl -a > name=HD-Audio > version=1.0 > config=azalia0 > encodings=slinear_le:16:2:1,slinear_le:20:4:1,slinear_le:24:4:1 > properties=full_duplex,independent > full_duplex=0 > fullduplex=0 > blocksize=3840 > hiwat=9 > lowat=8 > output_muted=0 > monitor_gain=0 > mode= > play.rate=48000 > play.channels=2 > play.precision=16 > play.bps=2 > play.msb=1 > play.encoding=slinear_le > play.gain=247 > play.balance=32 > play.port=0x0 > play.avail_ports=0x0 > play.seek=0 > play.samples=0 > play.eof=0 > play.pause=1 > play.error=0 > play.waiting=0 > play.open=0 > play.active=0 > play.buffer_size=65536 > play.block_size=3840 > play.errors=0 > record.rate=48000 > record.channels=2 > record.precision=16 > record.bps=2 > record.msb=1 > record.encoding=slinear_le > record.gain=126 > record.balance=32 > record.port=0x0 > record.avail_ports=0x0 > record.seek=0 > record.samples=0 > record.eof=0 > record.pause=1 > record.error=0 > record.waiting=0 > record.open=0 > record.active=0 > record.buffer_size=65536 > record.block_size=3840 > record.errors=0 > $ mixerctl -a > inputs.dac-0:1_mute=off > inputs.dac-0:1=222,222 > inputs.dac-2:3_mute=off > inputs.dac-2:3=222,222 > inputs.beep=108 > record.adc-0:1_source=mic2 > record.adc-0:1_mute=off > record.adc-0:1=126,126 > record.adc-4:5_source=mic2 > record.adc-4:5_mute=off > record.adc-4:5=126,126 > record.adc-2:3_source=sel2 > record.adc-2:3_mute=off > record.adc-2:3=126,126 > inputs.sel_source=mic > outputs.sel=126,126 > inputs.sel2_source=mic > outputs.sel2=126,126 > outputs.hp_source=dac-0:1 > outputs.hp_boost=off > outputs.mic_source=dac-0:1 > outputs.mic_dir=input-vr80 > outputs.mic_eapd=on > outputs.spkr_source=dac-2:3 > inputs.mic2=126,126 > inputs.mix_source=dac-0:1,dac-2:3 > inputs.mix_dac-0:1=126,126 > inputs.mix_dac-2:3=126,126 > outputs.hp_sense=unplugged > outputs.mic_sense=unplugged > outputs.spkr_muters=hp,mic > outputs.master=247,247 > outputs.master.mute=off > outputs.master.slaves=dac-0:1,dac-2:3 > record.volume=126,126 > record.volume.mute=off > record.volume.slaves=adc-0:1,adc-4:5,adc-2:3 > >
mumble.tgz
Description: mumble.tgz