--- In [email protected], "brucexs" <[EMAIL PROTECTED]> wrote: > > > > > > > BTW, are you running with User Access Control enabled. If so, I'd > > > be interested in exactly how you configure it to run as an admin. > > > Do you have to say OK to same dialog box each time PowerPro starts? > > > > > > > > Could you let us know exactly how you got it to run? > Ugh! Okay, you can disregard all of the previous posts regarding the pprotray.exe program being suspect. In attempting to recreate the failed state I was at in the beginning, I replaced my pproconf.pcf with one that should have been the same as when I first attempted to use powerpro. Unfortuneately, while many of the links were wrong, powerpro started just fine, including the pprotray.exe program.
Honestly, I was hacking away at the system with blind abandon trying to get it to work and eventually my flailing paid off. Unfortuneately, I now cannot get it to fail as before so I'm hesitant to suggest what the problem was nor what the remedy was. I regret any confusion my previous replies may have caused. PS: while I don't need to start powerpro as admin, I neglected to mention that I did need to install it with admin privileges. take care... Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/power-pro/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
