is > simply one that says "test message" and is set up to be used once and > then saved for re-use. When I want to use it, I just click the today > and now buttons, then okay. Is that what you wanted to know?
Tom, sorry, but I don't know what this could be as nothing untoward happens on my machine when I experiment with your alarm setup settings. Can you try this experiment. You need to follow all the steps exactly to make sure we are both doing the same thing. 1. Stop all programs on your machine but PowerPro. 2. Start notepad, explorer, paint. None should be maximized or minimized. 3. Use pproconf to create a scheduled event with command message and message Test for one minute from now and alarm again in 5 minutes. 4. OK out of configure. 5. Click on desktop so no program is active. 6. Wait for alarm. On my machine, when the alarm rings, the message box is active only. None of paint, explorer or notepad change state. What happens on yours? Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/power-pro/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
