Harris response below.

From: [email protected] [mailto:[email protected]] On Behalf Of 
Michael C Wynn
Sent: Sunday, January 09, 2011 10:18 AM
To: [email protected]
Subject: Powernet: Release of Personal Items from Small Article Monitors



1.       Does your facility have any guiding documents/training on the use of 1 
door & 2 door Small Article Monitors (SAM)? Procedure guidance.



2.       Specifically when the RCA exit points that  have a two door SAM and HP 
support is not in the immediate area or on the uncontrolled side of the SAM.  
When a worker is alone exiting the RCA and has more personnel materials 
(gloves, procedure, pens, clipboard) that can be placed into the SAM for a 
single counting sequence.  What is your expectation of the worker for 
monitoring/removing this personal materials? Non-RP personnel may self monitor 
personal articles other than gloves. If the Sam alarms, RP supports further 
monitoring of the personal articles.



3.       (Follow up question for #2) Would it acceptable for the individual to 
remove the cleared material from the SAM and then reach across the boundary to 
place it on the uncontrolled side of the boundary? Yes.



4.        The same question applies to areas where there is a single door SAM. 
Dou you require any compensatory actions for the individual and/or RP Tech to 
monitor the hand they use to move the "cleared' material across the RCA 
boundary to the Non-RCA side? Friskers are available but use is not mandatory.



Thank you in advance  for your help.

Michael C. Wynn
Supervisor Radiological Analysis
Millstone Power Station
Bldg. 437/2
Rope Ferry Road
Waterford, CT 06370
Office: (860) 447-1791 Ext. 4815
Fax: (860) 444-4241
http://www.dom.com/



CONFIDENTIALITY NOTICE: This electronic message contains information which may 
be legally confidential and/or privileged and does not in any case represent a 
firm ENERGY COMMODITY bid or offer relating thereto which binds the sender 
without an additional express written confirmation to that effect. The 
information is intended solely for the individual or entity named above and 
access by anyone else is unauthorized. If you are not the intended recipient, 
any disclosure, copying, distribution, or use of the contents of this 
information is prohibited and may be unlawful. If you have received this 
electronic transmission in error, please reply immediately to the sender that 
you have received the message in error, and delete it. Thank you.

Reply via email to