Browns Ferry also sees occasional dose rate alarms due to the dosimeter being dropped. We will always pull the histogram from the dosimeter and evaluate the event
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of BRAJUHA Zach(ZR) - BRUCE POWER Sent: Thursday, April 26, 2012 9:36 AM To: [email protected] Subject: Powernet: Dropped ED registering faulty dose rates Good morning, We have recently started using DMC2000S electronic dosimeters and have received several reports in the field of dose rate alarms after the device has has been dropped. We are currently working with the vendor to analyze the specific dosimeters in questions, but I'm wondering if anyone else in the industry has experienced this problem. I would like to know if this issue is specific to some of the dosimeters we have received, or if this has affected other plants? Any information is greatly appreciated. Thanks, Zach Brajuha RP FLM (Acting) Bruce Power (519) 361-2673 ext. 12851 ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail-archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected] ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail-archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected]
