on 17/11/02 5:30 PM, ncmphoto at [EMAIL PROTECTED] wrote: > If you still have problems consider the following method for cleaning off > the bottoms of the print heads which also can drag ink over not-intended > portions of the paper
Oh boy, have I been having fun ! I wish I had left well alone. But no, I just had to do a Fiddle Too Far... After using Neil's "Windowlene Printer Cleaning Method" I was still suffering from small drops of ink being dropped where they weren't intended. Did 5 test prints and10 Head Cleaning cycles and it didn't get any better. So.... Took your advice, Nina, and cleaned the heads as per your instructions (Two complete cleaning cycles using the square sponges) and am having problems... Jets are blocked : Even after about 20 Head cleaning cycles I cannot get the yellow ink jet to print the test pattern correctly. If anyone can advise, much appreciated, as always ! Thanks, David -- You can view David's on-line folio at http://www.davidtownend.com/ and also the results of a recent job at http://www.globalrisks.royalsun.com T - 00 44 (0)20 8374 6289 M - 00 44 (0)7770 622144 =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
