....just as an addition cause it might help. I try to recreate the front suspension of the Tyrell P34. So 4 wheels steered by one steering gear. In the real car the front and rear uprights of the front axle are connected via levers....simply said.
Cheers Daniel Rädel schrieb am Donnerstag, 24. August 2023 um 15:20:54 UTC+2: > I unfortunately mean the first. > Like if you have two separate spindles, each with one wheel on it. > Cheers > > Radu Serban schrieb am Donnerstag, 24. August 2023 um 15:17:16 UTC+2: > >> Hi Daniel, >> >> Multiple spindles that would rotate independently of each other? Or >> multiple wheels, all attached to the same spindle? If the latter, yes - >> some vehicle models in the Chrono distribution have that, see those for an >> example. >> >> Radu >> >> ------------------------------ >> *From:* [email protected] <[email protected]> on >> behalf of Daniel Rädel <[email protected]> >> *Sent:* Thursday, August 24, 2023 8:13:25 AM >> *To:* ProjectChrono <[email protected]> >> *Subject:* [chrono] Re: Generic Suspension Template; General Questions >> for understanding >> >> So i clarified my questions myself. >> >> But there is another one: >> >> Is it possible to have two separate spindles inside one suspension.json >> (suspension file)? >> >> Regards Daniel >> >> Daniel Rädel schrieb am Mittwoch, 23. August 2023 um 07:44:01 UTC+2: >> >>> Hello All, >>> i am currently working on a vehicle with generic suspension model. >>> I just have some basic questions. >>> >>> 1: Can i use the element "axle tube" (as used in the leaf spring >>> templates) also as an attachement body of the spindle? Can i use any body >>> as an attachement body of the spindle? >>> >>> 2: Case: i have a body that resembles a strut between two bodies. Can i >>> use two spherical bearings two attach them or does one have to be a >>> different joint like a universal or revolute joint? >>> >>> 3: Can i define a Distance Constraint (like the tierod f.e.) as i want? >>> Is a distance constraint between two bodies like as if they are glued >>> together or like a rod in between with joints? >>> >>> I hope you understand my questions. >>> Cheers Daniel >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "ProjectChrono" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/projectchrono/45b72d35-4b51-4293-9004-95ad6a6b90d0n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/projectchrono/45b72d35-4b51-4293-9004-95ad6a6b90d0n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- You received this message because you are subscribed to the Google Groups "ProjectChrono" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/projectchrono/1697bddf-6726-44f0-970e-10d90f2b3812n%40googlegroups.com.
