Hello, In the Bounce to disc dialog, choose format "Interleave". The result is a sterio wave file.
Regards Stefan Am Oct 29, 2011 um 7:02 AM schrieb Gordon Kent: > Hi: > I have been mainly using pt to do tracks and then sending the sessions up to > my partner in Jersey who has the clients we do work for do their vocals and > he mixes them on hi hd system. I finally got around to doing my first mix in > pt for one of my own t racks. I created a blank audio track, assigned the > outputs of the busses I was using for submixes to a bus and set the input of > the audio track to that bus, then did the realtime bounce. The problem > though is that you end up with two mono files. How do I create a stereo wav > file instead? I ended up having to copy the files to a windows system, > inport them into sonar on separate tracks and export the stereo audio from > sonar to mp3, which is what I wanted anyway. I can't imagine that their > isn't a way to create a single stereo wav file in pt when mixing down. Also, > doesn't pt come with an mp3 encoder? > Thanks as always > Gord > > -----Original Message----- From: Slau Halatyn > Sent: Wednesday, October 19, 2011 8:17 AM > To: [email protected] > Subject: Re: manipulating crossfades > > Stefan, > > You can select other curve presets by using either the Control or Option > modifiers with the left and right arrow keys. Select the range you wish to > fade and bring up the fade dialog (Command-f, I believe). If you're dealing > with a fade out, use the Control key. If you're dealing with a fade in, use > the Option key. In this case, I'll refer to the Control key since you > mentioned a fade out. > > While holding down the Control key, use the left and right arrows to select > different curves. There are 7 presets and they don't wrap around so you can > press either key several times to make sure you're starting from the first > (or last) curve. The curves are as follows (and I'll be referring to them in > the context of a fade out): > 1. instant out from the beginning of the selection. This essentially mutes > the audio right from the beginning of the selection. > 2. Very fast initial fade with a long tail. > 3. Moderately fast fade with a moderate tail. > 4. Linear fade. This is just a standard constant fade. > 5. Slower initial fade with moderately fast fade toward the end. > 6. Very slow initial fade with very fast fade out at the end. > 7. Full volume all the way to the end with instant mute at the end. > These descriptions seem perhaps a little clumsy in part because the fades are > not labelled as such but are purely graphic in representation. By the way, > one could think of these curves in terms of attack and release. Curves 2 and > 3 have faster initial attacks and slower releases while 5 and 6 have slower > attacks and faster releases. The fade characteristics are reversed for fade > ins. In other words, for fade ins, 2 and 3 have slow attacks and fast > releases and would have the effect of slowly fading in with a faster rise > toward the end of the fade in. Hopefully, that all makes sense. > > Unfortunately, it's not possible to drag the curves with voiceOver however > I've never had the need to do that in the last 10 years. Lastly, while you're > in the fades dialog, pressing the space bar will audition the fade. > > Hope that helps, > > Slau > > On Oct 19, 2011, at 6:51 AM, Stefan Albertshauser wrote: > >> Hello, What do you do, if the fade presets, which are provieded in the fade >> dialog don't match for the task, you want to perform? In my case, there is a >> haprsichord recording, which I want to edit. If I make a crossfade, the >> fadeout is stronger than the natural sounding of the strings of the >> harpsichord and dragging the curve with VO seams to be not possible. >> >> Thanks for your help. >> >> Stefan >
